Tag: M.W=100-200

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 624-76-0, name is 2-Iodoethanol, This compound has unique chemical properties. The synthetic route is as follows., HPLC of Formula: C2H5IO

Example 124 1-[3,5-bis(trifluoromethyl)phenyl]-3-[(3R,4R)-3-(4-fluorophenyl)-1-(2-hydroxyethyl)piperidin-4-yl]-1,3-dimethylurea monohydrochloride To a solution of the compound (0.18 g) obtained in Example 51 and 2-iodoethanol (0.055 mL) in DMF (6.0 mL) was added N,N-diisopropylethylamine (0.184 mL) at room temperature, and the mixture was heated to 40C and stirred overnight. The reaction mixture was diluted with ethyl acetate, washed with water and saturated brine, dried and concentrated under reduced pressure. The residue was purified by silica gel column chromatography (NH Chromatorex) (solvent gradient; 0?100% ethyl acetate/hexane) and treated with 2N hydrogen chloride/2-propanol to give the title compound (0.16 g, 83%) as a white powder. MS(ESI+): 522 (M-HCl+H)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 624-76-0.

Reference:
Patent; Takeda Pharmaceutical Company Limited; EP2336105; (2011); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 7681-82-5, name is Sodium iodide, molecular formula is INa, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Quality Control of Sodium iodide

General procedure: All reagents were ACS-reagent grade. Distilled water was used for the preparation of solutions. The procedure for the preparation of CaApOH is as follows: samples of 1.2g Ca(NO3)2·4H2O, 0.5g Na3PO4, and 0.04g NaOH were placed in the bottom of a 125mL Erlenmeyer flask equipped with a standard taper joint bearing a condenser with a thermometer inserted in the condenser and held slightly above the bottom of the flask (but in the solution) by a thin slice of suction tubing at the top of the condenser. The flask was placed on a heating/stir plate and 50mL of distilled water was added. The solution was stirred magnetically and heated to 80C for approximately 3h. The pH was measured, but not adjusted, at the beginning and at the end of the 3h of digestion using Hydrion pH 1.0-12.0 paper. [In order to determine the effect of pH, the pH was adjusted with 3 M NaOH for some samples at the beginning and during digestion.] Stirring was then discontinued and the solution was allowed to cool and settle overnight. The precipitate was suction filtered in a medium porosity glass filter crucible and washed 5 times with a total of about 150mL of distilled water. The precipitate was dried in a vacuum drying oven at 110 C for at least 4h and then ground with a mortar and pestle and stored in a closed, parafilmed vial.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 7681-82-5, its application will become more common.

Reference:
Article; Yoder, Claude H.; Havlusch, Maxwell D.; Dudrick, Robyn N.; Schermerhorn, Janse T.; Tran, Linh K.; Deymier, Alix C.; Polyhedron; vol. 127; (2017); p. 403 – 409;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 624-76-0, The chemical industry reduces the impact on the environment during synthesis 624-76-0, name is 2-Iodoethanol, I believe this compound will play a more active role in future production and life.

General procedure: A mixture of compound 1 (1 mmol) in acetonitrile (30 mL) and functionalized alkyl halides(1.3 mmol) was irradiated by ultrasound irradiation. The reaction was processed as described above togive the same ionic liquids 2-7.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Iodoethanol, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Rezki, Nadjet; Al-Sodies, Salsabeel A.; Shreaz, Sheikh; Shiekh, Rayees Ahmad; Messali, Mouslim; Raja, Vaseem; Aouad, Mohamed R.; Molecules; vol. 22; 11; (2017);,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 624-75-9, name is 2-Iodoacetonitrile, molecular formula is C2H2IN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. SDS of cas: 624-75-9

The compound obtained in Example 64 (4.6 g, 15.35 mmol) and potassium carbonate (10.6 g, 76.73 mmol) were added to acetone (100 mL) and refluxed for 2 hours. To this reaction mixture was dropwise added iodoacetonitrile (1.34 mL, 18.42 mmol), and refluxed over 2 hours. The acetone was removed by vacuum distillation, and the residue was treated in water (200 mL) and ethyl acetate (200 mL). The organic layer was dried over anhydrous magnesium sulfate and distillated in a vacuum. The concentrate was subjected to column chromatography (silica gel, ethyl acetate-hexane 2:3 v/v) to afford a mixture of 2:1 of regioisomers as yellow oil. These two regioisomers (4.16 g, 80%) were used in the next reaction step without separation.Example 65-2Preparation of 4-(2-chloropyridin-5-yl)-5-(3-methoxy-5-methylphenyl)-pyrazol-1-yl)acetonitrile1H NMR (CDCl3) delta 2.28 (s, 3H), 3.66 (s, 3H), 5.16 (s, 2H), 6.71 (s, 2H), 6.84 (s, 1H), 7.24 (d, J=8.3 Hz, 1H), 7.49 (dd, J=2.3, 5.9 Hz, 1H), 7.70 (s, 1H, 8.32 (s, 1H); 13C NMR (CDCl3) delta 21.57, 39.89, 55.23, 110.80, 113.76, 115.28, 117.76, 121.47, 124.02, 127.24, 129.92, 132.57, 138.58, 140.12, 148.71, 149.92, 151.17, 159.69, 162.33.To a solvent mixture of THF and water (4:1, 10 mL) were added the mixture prepared in Example 65 (0.32 g, 0.95 mmol), 3-acetylphenylboronic acid (0.19 g, 1.13 mmol), dichlorobis(triphenylphosphine)palladium (II) (33 mg, 0.04 mmol) and potassium carbonate (0.13 g, 0.95 mmol). The reaction system was purged with nitrogen gas for 10 min, and stirred at 70 C. for 12 hours under nitrogen atmosphere. The reaction mixture was cooled at room temperature, washed with ice water (100 mL) and extracted with ethyl acetate (100 mL×3). The organic extract was dried over anhydrous magnesium sulfate and distilled under vacuum. The residue was subjected to prep-TLC using a solvent mixture of ethyl acetate/hexane to purify the desired products.Purification yield by prep-TLC (silica gel, ethyl acetate-hexane, 1:2, v/v): (106 mg); m.p. 149-150 C.; 1H NMR (CDCl3) delta 2.37 (s, 3H), 2.67 (s, 3H), 3.78 (s, 3H), 4.95 (s, 2H), 6.71 (s, 1H), 6.77 (s, 1H), 6.87 (s, 1H), 7.51-7.70 (m, 3H), 7.92 (s, 1H), 7.97 (d, J=7.6 Hz, 1H), 8.16 (d, J=7.8 Hz, 1H), 8.53 (s, 1H), 8.57 (d, J=1.2 Hz, 1H); 13C NMR (CDCl3) delta 21.61, 26.82, 37.80, 55.41, 112.41, 114.22, 116.66, 118.39, 120.33, 122.71, 126.53, 126.96, 128.67, 129.04, 129.09, 131.18, 135.01, 137.58, 139.36, 139.48, 141.15, 141.36, 147.96, 154.21, 160.37, 198.06.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 624-75-9, its application will become more common.

Reference:
Patent; LEE, So Ha; Yoo, Kyung Ho; Oh, Chang Hyun; Han, Dong Keun; El-Deeb, Ibrahim Mustafa; Park, Byung Sun; Jung, Su Jin; US2011/15395; (2011); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Application of 624-75-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 624-75-9 name is 2-Iodoacetonitrile, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

First, a stirrer was placed in a 35 mL sealed tube, and 35 muL of styrene (0.3 mmol), 1.0 ml of acetonitrile, and 44 muL of iodoacetonitrile (0.60 mmol) were added thereto, and 5·4 mg of Phen was added to the mixed solution. (0·03mmol), 5.7mgCul (0.03mmol) and 91yL DBU (0.60mmol), tightly seal the nozzle with a cock, heat to 110 C, stir for 1.5 hours, after the reaction is finished, the system is cooled to room temperature, into the reaction system 2 ml of distilled water was added, and the mixture was extracted with ethyl acetate. The organic phases were combined, and the solvent of the organic phase was evaporated under reduced pressure.36.5 mg of a colorless liquid product 3a was obtained by silica gel column chromatography, yield 85%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Iodoacetonitrile, and friends who are interested can also refer to it.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 624-76-0, name is 2-Iodoethanol belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Quality Control of 2-Iodoethanol

Example 58Preparation of Derivative 58 According to the Present InventionDerivative 58 having the following formula was prepared as follows. Sodium hydride (24.14 mg, 1.0 mmol, 60% dispersed oil) was added in 20 ml of DMF solution containing 5-4-(2-cyclohexylethoxy)benzylidene)thiazolidin-2,4-dione (200 mg, 0.60 mmol) and stirred at room temperature under nitrogen. The mixture was further stirred for 10 minutes, and 2-iodoethanol (123.81 mg, 0.72 mmol) dissolved in 5 ml of DMF was slowly added thereto. After being stirred at 60 C. for 48 hours, the reaction mixture was extracted with ethyl acetate and washed with water. The organic layer was dried with anhydrous magnesium sulfate, filtered and solvent-evaporated. The residue was purified by silica gel chromatography (hexane:ethyl acetate=10:1) to afford Derivative 58 having the above formula, 5-[(4-(2-cyclohexylethoxy)benzylidene]-3-(hydroxyethyl)-1,3-thiazolidine-2,4-dione (180 mg, yield: 79%).1H NMR (300 MHz, CDCl3) delta 7.878 (s, 1H), 7.485 (d, J=14.4 Hz, 2H), 7.007 (d, J=14.4 Hz, 2H), 4.078 (t, J=13.2 Hz, 2H), 4.001 (t, J=10.2 Hz, 2H), 3.891 (t, J=10.2 Hz, 2H), 2.049 (m, 1H), 1.670-1.782 (m, 7H), 1.471-1.529 (m, 1H), 1.178-1.284 (m, 3H), 0.956-1.034 (m, 2H)

The synthetic route of 624-76-0 has been constantly updated, and we look forward to future research findings.

Electric Literature of 627-32-7,Some common heterocyclic compound, 627-32-7, name is 3-Iodo-1-propanol, molecular formula is C3H7IO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Example 33 2-Amino-6-({[2-(4-chlorophenyl)-1,3-thiazol-4-yl]methyl}sulfanyl)-4-[1-(3-hydroxypropyl)-1H-pyrazol-3-yl]pyridine-3,5-dicarbonitrile 50 mg (0.092 mmol) of the compound from Example 5 were dissolved in 0.8 ml of DMF, 15 mg (0.101 mmol) of DBU and 21 mg (0.111 mmol) of 3-iodopropanol were added and the mixture was stirred at 120 C. overnight. A little water and ethyl acetate were added to the mixture, and the two phases formed were separated. The aqueous phase was extracted twice with ethyl acetate. The combined organic phases were concentrated on a rotary evaporator and the residue was purified by thick-layer chromatography (toluene:acetonitrile=3:1). Yield: 18 mg (38% of theory) 1H-NMR (400 MHz, DMSO-d6): delta=8.10 (br s, 2H), 7.96-7.90 (m, 4H), 7.57 (d, 2H), 6.74 (d, 1H), 4.62 (s, 2H), 4.60 (t, 1H), 4.26 (t, 2H), 3.40 (q, 2H), 1.96 (Quintett, 2H). LC-MS (Method 2): Rt=2.54 min; MS (ESIpos): m/z=508 [M+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 3-Iodo-1-propanol, its application will become more common.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 624-76-0, name is 2-Iodoethanol, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 2-Iodoethanol

[00396] To a jacketed glass reactor equipped with overhead stirring, was charged tert-butyl ((2R,3R,4R,5R)-2-(((l S,2S,3R,4S,6R)-3-(((2S,3R)-6-(aminomethyl)-3-((tert- butoxycarbonyl)amino)-3,4-dihydro-2H-pyran-2-yl)oxy)-4-((tert-butoxycarbonyl)amino)-6- ((S)-4-((tert-butoxycarbonyl)amino)-2-hydroxybutanamido)-2-hydroxycyclohexyl)oxy)-3,5- dihydroxy-5-methyltetrahydro-2H-pyran-4-yl)(methyl)carbamate, formula (6a), (250 g, 0.263 mol, 1 equiv). Acetonitrile (1250 mL) was charged to the reactor and the temperature was stabilized between 15 and 30 C (24.3 C). The mixture was concentrated under vacuum to a final volume target of 500 mL. The solution was sampled for water content by KF which provided a result of 0.22% w/w. An additional portion of acetonitrile (750 mL) was charged to the reactor and a second azeotropic distillation was performed to a volume target of 500 mL. The mixture was sampled for KF and a result of 0.097%> w/w was obtained. The reaction temperature was stabilized at 29.9 C and acetone (1250 mL) was charged to the mixture. The reaction was heated and the temperature stabilized at 29.9 C. Sodium bicarbonate (44.25 g, 0.527, 2.0 equiv) was charged to the reaction mixture followed by 2-iodoethanol (44.4 g, 20.14 mL, 0.258 mol, 0.98 equiv). After 43 h an additional portion of 2-iodoethanol (0.25 mL) was added to the reaction mixture. After 9.5 hours a third portion of 2-iodoethanol (0.3 mL) was added to the reaction mixture. After an additional 2 h, the reaction was sampled and deemed complete by HPLC analysis (consumption of tert-butyl ((2R,3R,4R,5R)-2- (((l S,2S,3R,4S,6R)-3-(((2S,3R)-6-(aminomethyl)-3-((tert-butoxycarbonyl)amino)-3,4- dihydro-2H-pyran-2-yl)oxy)-4-((tert-butoxycarbonyl)amino)-6-((S)-4-((tert- butoxycarbonyl)amino)-2-hydroxybutanamido)-2-hydroxycyclohexyl)oxy)-3,5-dihydroxy-5- methyltetrahydro-2H-pyran-4-yl)(methyl)carbamate, formula (6a),). The reaction was cooled to 22.7 C and l,4-diazabicyclo[2.2.2]octane (60.0 g, 0.535 mol, 2.03 equiv) was charged as a solid. The destruction of 2-iodoethanol was monitored by a GC method and after 10 h the quench of this reagent was deemed complete. Water (1250 mL) and isopropyl acetate (1250 mL) were charged to the reaction mixture. The reactor contents were agitated by 25 min and the layers allowed to separate. The lower aqueous layer (API) and the upper organic layer (OP1) were collected in receivers. API was returned to the reactor and a second portion of isopropyl acetate (750 mL) was charged. The reactor contents were agitated for 30 minutes and the layers allowed to separate. The lower aqueous layer (AP2) and the upper organic layer (OP2) were collected in receivers. OP1 and OP2 were combined in the reactor and extracted with two portions of saturated sodium chloride solution (750 mL, prepared by dissolving 100 g NaCl/290 mL of water). The washed organic phase (OP4) was concentrated under vacuum to a volume target of 500 mL. Acetonitrile (2550 mL) was charged to the reactor. A second azeotropic vacuum distillation was performed to a volume target of 1550 mL. Isopropyl acetate (200 mL) was charged to the mixture. Water (10.7 mL) was charged to the mixture until a KF of 0.85% was obtained. The reactor contents were heated to 75 C upon which a solution was obtained. The reaction mixture was cooled to 57 C and seeded with tert-butyl ((2R,3R,4R,5R)-2-(((l S,2S,3R,4S,6R)-4-((tert-butoxycarbonyl)amino)-6-((S)- 4-((tert-butoxycarbonyl)amino)-2-hydroxybutanamido)-3-(((2S,3R)-3-((tert- butoxycarbonyl)amino)-6-(((2-hydroxyethyl)amino)methyl)-3,4-dihydro-2H-pyran-2- yl)oxy)-2-hydroxycyclohexyl)oxy)-3,5-dihydroxy-5-methyltetrahydro-2H-pyran-4- yl)(methyl)carbamate, formula (7a), (5 g, 0.0050 mol, 0.02 equiv). Stirring was maintained at 57 C for 2 h during which a thick slurry formed. The mixture was cooled from 65 C to 2.5 C over a period of 12 h. The slurry was filtered and washed with acetonitrile (900 mL) and dried in a vacuum oven to afford tert-butyl ((2R,3R,4R,5R)-2-(((l S,2S,3R,4S,6R)-4-((tert- butoxycarbonyl)amino)-6-((S)-4-((tert-butoxycarbonyl)amino)-2-hydroxybutanamido)-3- (((2S,3R)-3-((tert-butoxycarbonyl)amino)-6-(((2-hydroxyethyl)amino)methyl)-3,4-dihydro- 2H-pyran-2-yl)oxy)-2-hydroxycyclohexyl)oxy)-3,5-dihydroxy-5-methyltetrahydro-2H-pyran- 4-yl)(methyl)carbamate, formula (7a), (218.1 g, 0.220 mol, 83% molar yield)

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 624-76-0.

Related Products of 627-32-7, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 627-32-7, name is 3-Iodo-1-propanol belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

A mixture of 1 -(4-hydroxyphenyl)-3 -methyl-i H-pyrazole-4-carbaldehyde (214 mg, 1.057 mmol, 1 eq.), 3-iodopropan-i-ol (1.27 g, 1.268 mmol, 1.2 eq), K2C03 (292 mg, 2.114 mmol, 2 eq.) in 5 mL CH3CN was heated at reflux for 24 h. The mixture was thenfiltered, and the remaining solid was washed with EtOAc twice (10 mL each time). The organic layers were concentrated and purified using silica column chromatography to afford 1 -(4-(3 -hydroxypropoxy)phenyl)-3 -methyl-i H-pyrazole-4-carbaldehyde as a yellow solid (190 mg, yield: 69%). ?H NIVIR (CDC13) oe (ppm) 2.04-2.12 (m, 2H), 2.55 (s, 3H), 3.86-3.90 (t, 2H), 4.15-4.19 (t, 2H), 7.03 (d, J= 9.0 Hz, 2H), 7.34 (d, J= 9.0 Hz,2H), 8.03 (s, 1H), 9.96 (s, 1H); ?3C NIVIR (CDC13) oe (ppm) 11.55, 31.88, 59.94, 65.77,114.97, 121.48, 126.74, 131.18, 142.13, 143.41, 159.13, 184.94;ESI-MS(M+H)m/z=261.0.

The synthetic route of 3-Iodo-1-propanol has been constantly updated, and we look forward to future research findings.

Related Products of 624-75-9,Some common heterocyclic compound, 624-75-9, name is 2-Iodoacetonitrile, molecular formula is C2H2IN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Cyanomethyl)trimethylphosphonium iodide was prepared according to the general method described in Zaragoza, F., et al., J. Org. Chem.2001, 66, 2518-2521. In a 1 L round bottom flask, trimethylphosphine in toluene (100 mL, 100 mmol) was diluted with THF (50.0 mL) and toluene (50.0 mL), and cooled on an ice bath. The reaction mixture was stirred vigorously while iodoacetonitrile (7 mL, 16.7 g, 68.3 mmol) was added dropwise to produce a tan precipitate. The cooling bath was removed and the reaction mixture was stirred overnight at room temperature. The flask was placed in a sonicator to break up any clumped solids. The reaction mixture was stirred an additional 4 hours. The solids were collected by filtration and dried under vacuum to give (1380) (cyanomethyl)trimethylphosphonium iodide (16.6 g, 68.3 mmol, 68.3 % yield). 1H NMR (400 MHz, DMSO-d6) 4.03 (d, J=16.4 Hz, 2H), 2.05 (d, J=15.4 Hz, 9H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Iodoacetonitrile, its application will become more common.