Category: 645-00-1

Electric Literature of 645-00-1, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 645-00-1 name is 1-Iodo-3-nitrobenzene, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: To a stirred solution of aryl halides (2.0 mmol) and thiourea (1.2 equiv) in dry DMSO (2.0 mL) at rt was added nano CuO (5.0 mol %) followed by Cs2CO3 (2.0 equiv) and heated at 110 C for 15 h. The progress of the reaction was monitored by TLC. After the reaction was complete, the reaction mixture was allowed to cool, and a 1:1 mixture of ethyl acetate/water (20 mL) was added. The combined organic extracts were dried with anhydrous Na2SO4. The solvent and volatiles were completely removed under vacuum to give the crude product, which was purified by column chromatography on silica gel (petroleum ether/ethyl acetate, 9:1) to afford the corresponding coupling product in excellent yields.Recycling of the catalyst:after the reaction was complete, the reaction mixture was allowed to cool, and a 1:1 mixture of ethyl acetate/water (2.0 mL) was added and CuO was removed by centrifugation. After each cycle, the catalyst was recovered by simple centrifugation, washing with deionized water and ethyl acetate and then drying in vacuo. The recovered nano CuO was used directly in the next cycle.Data of representative examples:Dip-tolylsulfane (Table 3, entry 3): yellow oil;1H NMR (200 MHz, CDCl3, TMS): delta = 7.21 (d, 4H, J = 8.0 Hz), 7.06 (d, 4H, J = 8.0 Hz), 2.32 (s, 6H); 13C NMR (50 MHz, CDCl3, TMS): delta = 136.7, 132.81, 131.0, 129.8, 96.1.Table 3, entry 3): yellow oil;1H NMR (200 MHz, CDCl3, TMS): delta = 7.21 (d, 4H, J = 8.0 Hz), 7.06 (d, 4H, J = 8.0 Hz), 2.32 (s, 6H); 13C NMR (50 MHz, CDCl3, TMS): delta = 136.7, 132.81, 131.0, 129.8, 96.1.Bis(4-ethylphenyl)sulfane (Table 3, entry 4): colorless oil; 1HNMR (300 MHz, CDCl3, TMS): delta = 7.21(d, 4H, J = 7.8 Hz), 7.07 (d, 4H, J = 7.8 Hz), 2.62-2.52 (m, 4H), 1.26 (t, 6H, J = 7.8 Hz);13C NMR (75 MHz, CDCl3, TMS): delta = 143.1, 132.7, 131.0, 128.6, 28.3, 15.4; mass (EI): m/z 242 [M]+; Anal. calcd for: (C16H18S) C, 79.29; H, 7.49; S, 13.23; found: C,79.22; H,7.42; S,13.19.Table 3, entry 4): colorless oil; 1HNMR (300 MHz, CDCl3, TMS): delta = 7.21(d, 4H, J = 7.8 Hz), 7.07 (d, 4H, J = 7.8 Hz), 2.62-2.52 (m, 4H), 1.26 (t, 6H, J = 7.8 Hz);13C NMR (75 MHz, CDCl3, TMS): delta = 143.1, 132.7, 131.0, 128.6, 28.3, 15.4; mass (EI): m/z 242 [M]+; Anal. calcd for: (C16H18S) C, 79.29; H, 7.49; S, 13.23; found: C,79.22; H,7.42; S,13.19.Bis(3-nitrophenyl)sulfane (Table 3, entry 7): pale yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 8.19-8.15 (m, 4H), 7.65 (d, 2H, J = 8.3 Hz), 7.55 (t, 2H, J = 8.3 Hz); 13C NMR (75 MHz, CDCl3, TMS): delta = 148.8, 136.7, 130.7, 125.6, 122.7; mass (EI): m/z 276 [M]+; Anal. calcd for: (C12H8N2O4S) C, 52.17; H, 2.92; S, 11.61; N, 10.14; found: C, 52.12; H, 2.86; S, 11.55; N, 10.9.Table 3, entry 7): pale yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 8.19-8.15 (m, 4H), 7.65 (d, 2H, J = 8.3 Hz), 7.55 (t, 2H, J = 8.3 Hz); 13C NMR (75 MHz, CDCl3, TMS): delta = 148.8, 136.7, 130.7, 125.6, 122.7; mass (EI): m/z 276 [M]+; Anal. calcd for: (C12H8N2O4S) C, 52.17; H, 2.92; S, 11.61; N, 10.14; found: C, 52.12; H, 2.86; S, 11.55; N, 10.9.4,4′-Thiodianiline (Table 3, entry 11): brown solid; mp 104-105 C; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.10 (d, 4H, J = 8.68 Hz), 6.52 (d, 4H, J = 8.68 Hz), 3.51 (br s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 145.5, 133.8, 132.6, 124.8, 115.6; mass (EI): m/z 216 [M]+; Anal. calcd for: (C12H12N2S) C, 66.63; H, 5.59; N, 12.95; S, 14.82; Found: C, 66.61; H, 5.58; N, 12.92; S, 14.81.Table 3, entry 11): brown solid; mp 104-105 C; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.10 (d, 4H, J = 8.68 Hz), 6.52 (d, 4H, J = 8.68 Hz), 3.51 (br s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 145.5, 133.8, 132.6, 124.8, 115.6; mass (EI): m/z 216 [M]+; Anal. calcd for: (C12H12N2S) C, 66.63; H, 5.59; N, 12.95; S, 14.82; Found: C, 66.61; H, 5.58; N, 12.92; S, 14.81.Dithiophen-3-ylsulfane (Table 3, entry 15): yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.31-7.25 (m, 2H), 7.17-7.11(m, 2H), 6.96-6.94 (m, 2H); 13C NMR (75 MHz, CDCl3, TMS): delta = 129.6, 126.4, 124.7; mass (EI): m/z 197 [M]+; Anal. calcd for: (C8H6S3) C, 48.45; H, 3.05; S, 48.50; found: C,48.42; H,3.02; S,48.47.Table 3, entry 15): yellow oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 7.31-7.25 (m, 2H), 7.17-7.11(m, 2H), 6.96-6.94 (m, 2H); 13C NMR (75 MHz, CDCl3, TMS): delta = 129.6, 126.4, 124.7; mass (EI): m/z 197 [M]+; Anal. calcd for: (C8H6S3) C, 48.45; H, 3.05; S, 48.50; found: C,48.42; H,3.02; S,48.47.Dipyrimidin-5-ylsulfane (Table 3, entry 17): colorless oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 9.15 (s, 2H), 8.74(s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 158.6, 157.7, 129.8; mass (EI): m/z 190 [M]+; Anal. calcd for: (C8H6N4S) C, 50.51; H, 3.18; N, 29.45; S, 16.86; found: C, 50.45; H, 3.13; N, 29.41; S, 16.81.Table 3, entry 17): colorless oil; 1H NMR (300 MHz, CDCl3, TMS): delta = 9.15 (s, 2H), 8.74(s, 4H); 13C NMR (75 MHz, CDCl3, TMS): delta = 158.6, 157.7, 129.8; mass (EI): m/z 190 [M]+; Anal. calcd for: (C8H6N4S) C, 50.51; H, 3.18; N, 29.45; S, 16.86; f…

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 1-Iodo-3-nitrobenzene, and friends who are interested can also refer to it.

Reference:
Article; Reddy, K. Harsha Vardhan; Reddy, V. Prakash; Shankar; Madhav; Anil Kumar; Nageswar; Tetrahedron Letters; vol. 52; 21; (2011); p. 2679 – 2682;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 645-00-1, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 645-00-1, name is 1-Iodo-3-nitrobenzene belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: A mixture of aryl halide (0.1mmol) and KOH (0.3mmol), was added to a mixture of DMF (2mL) and ChCl·CuCl (20mol%) under an N2 atmosphere in a round-bottom flask equipped with a condenser. The mixture was heated in an oil bath at 140C and then phenylacetylene (0.15mmol) was added in three portions. The mixture was stirred continuously during the reaction and monitored by both thin-layer chromatography and gas chromatography (GC). After the reaction was complete, the mixture was cooled to room temperature and diluted with EtOAc and H2O. The organic phase was dried over CaCl2, filtered, and concentrated under reduced pressure using a rotary evaporator. The residue was purified by silica gel column chromatography. The products were characterized by IR, 1H NMR, 13C NMR, and GC-MS.

The synthetic route of 1-Iodo-3-nitrobenzene has been constantly updated, and we look forward to future research findings.

Reference:
Article; Hajipour, Abdol R.; Nazemzadeh, Seyed Hadi; Mohammadsaleh, Fatemeh; Tetrahedron Letters; vol. 55; 3; (2014); p. 654 – 656;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 645-00-1, name is 1-Iodo-3-nitrobenzene, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 645-00-1, Recommanded Product: 1-Iodo-3-nitrobenzene

General procedure: An aryl halide (1.0 mmol) and a terminal alkyne (1.2 mmol) were added to a mixture of PS-dtz-Pd(II) (0.001 mmol), piperidine (2.0 mmol), and water (3 ml) in a glass flask under vigorous stirring. The mixture was stirred at room temperature for 3 h under aerobic conditions. After completion of the reaction, the mixture was filtered to recover the catalyst. The polymer was washed with water and acetonitrile, vacuum dried, and stored for a new run. After GC analysis, the solvent was removed under vacuum, and the crude product was subjected to silica gel column chromatography using CHCl3-CH3OH (97:3) as eluent to afford the pure product.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Iodo-3-nitrobenzene, other downstream synthetic routes, hurry up and to see.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 645-00-1, name is 1-Iodo-3-nitrobenzene, A new synthetic method of this compound is introduced below., Quality Control of 1-Iodo-3-nitrobenzene

General procedure: SAC (300mg) and NaBH4 (4.0mmol) were added to a solution of nitroarenes (1.0mmol) in EtOH/water (1/1) (20ml). The reaction mixture was stirred for 4h at the temperature indicated in Table3. At the end of the reaction, the catalyst was removed by filtering and the filtrate was extracted with 3×70ml EtOAc. The combined organic layers were dried over MgSO4 and concentrated in a vacuum.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

645-00-1, name is 1-Iodo-3-nitrobenzene, belongs to iodides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Formula: C6H4INO2

EXAMPLE 3 6-(Furan-3-yl)-3-[3-(imidazol-1-yl)phenyl]-3 H -imidazo[4,5- b ]pyridine An intimate mixture of 1-iodo-3-nitrobenzene (24.9 g, 0.1 mol), copper bronze (320 mg, 5 mmol), potassium carbonate (15.2 g, 0.11 mol) and imidazole (15.0 g, 0.22 mol) was heated under a stream of nitrogen at 200C for 90 minutes. The reaction was cooled to 100C, carefully treated with water (750 ml) and the resulting suspension stirred to ambient temperature over 16 hours. Filtration gave a grey-coloured solid which was dissolved in hot toluene (125 ml) and treated with decolourising charcoal (2 g). Filtration and cooling afforded 1-(3-nitrophenyl)-1H-imidazole as pale green needles (13.5 g, 71%). deltaH (360 MHz, CDCl3) 7.29 (1H, br s), 7.38 (1H, br s), 7.68-7.78 (2H, m), 7.97 (1H, br s), 8.23-8.29 (2H, m).

The synthetic route of 645-00-1 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Merck Sharp & Dohme Limited; EP1214319; (2003); B1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 645-00-1, The chemical industry reduces the impact on the environment during synthesis 645-00-1, name is 1-Iodo-3-nitrobenzene, I believe this compound will play a more active role in future production and life.

General procedure: In a typical reaction, a mixture of aryl halides (1.0 mmol), phenylacetylene (1.5 mmol), piperidine (2.0 mmol), H2O (6 ml) and catalyst (0.5 mol% of Pd) was stirred at 100 C for appropriate time. Progress of the reaction was monitored by GC analysis at different time interval of the reaction. After the completion of the reaction, the mixture was cooled to room temperature, diluted with water, and extracted with CH2Cl2 for three times. The organic phase thuscollected was dried with Na2SO4 and concentrated. The crude product was purified by flash column chromatography on silica gel. The product was analyzed by GC/MS, 1H NMR and elemental analyses. All the products were known compounds and were identified by comparison of their physical and spectra data with those of authentic samples.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Iodo-3-nitrobenzene, other downstream synthetic routes, hurry up and to see.

Reference:
Short Survey; He, Ying; Cai, Chun; Journal of Organometallic Chemistry; vol. 696; 13; (2011); p. 2689 – 2692;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 645-00-1, name is 1-Iodo-3-nitrobenzene, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 645-00-1, category: iodides-buliding-blocks

General procedure: An aryl halide (1.0mmol) and a terminal alkyne (1.0mmol) was added to a mixture of PS-triazine-Pd(II) (0.001mmol) and base (1mmol) in a glass flask under vigorous stirring. The mixture was stirred at room temperature for 3h under aerobic conditions. Upon completion of the reaction, the reaction mixture was dissolved in chloroform (2mL). The palladium catalyst was separated from the mixture by filtration, washed with acetonitrile (10mL), and reused in the next run. Then to the chloroform solution was added toluene (1.0mmol) as the internal standard for GC analysis. After the analysis, the solvent was removed under vacuum, and the crude product was subjected to silica gel column chromatography using CHCl3-CH3OH (95:5) as eluent to afford the pure product.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Bakherad, Mohammad; Bahramian, Bahram; Jajarmi, Saeideh; Journal of Organometallic Chemistry; vol. 749; (2014); p. 405 – 409;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 645-00-1,Some common heterocyclic compound, 645-00-1, name is 1-Iodo-3-nitrobenzene, molecular formula is C6H4INO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: TAPEHA-Pd (0.015 g) was added to a solution of nitroarenes (1.0 mmol) in EtOH/water (1/1) (20 mL). After NaBH4 (4.0 mmol) was slowly added to the mixture, the color of the reaction mixture turned gradually black in a few minutes, resulting in the formation of palladium nanoparticles (TAPEHA-PdNPs). 42 After being stirredfor 1.5 h at room temperature and atmospheric pressure, the catalyst was removed by ltering and the fitrate was extracted with 3 30 mL of EtOAc. The combined organic layers were dried over MgSO4 and concentrated in a vacuum.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Iodo-3-nitrobenzene, its application will become more common.

Reference:
Article; Genc, Hayriye; Zengin, Mustafa; Kuecuekislamo?lu, Mustafa; Imamoglu, Mustafa; Toplan, Hueseyin Oezkan; Arslan, Mustafa; Turkish Journal of Chemistry; vol. 41; 5; (2017); p. 784 – 792;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 645-00-1, name is 1-Iodo-3-nitrobenzene, molecular formula is C6H4INO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Recommanded Product: 1-Iodo-3-nitrobenzene

General procedure: Aryl halide (1.5 mmol), Na2CO3 (1.8 mmol), K4[Fe(CN)6](0.2 mmol), Pd NPsFe3O4/chitosan/pumice hybrid beads (0.01 mol%), and DMF (5 mL) were put into a Schlenk tube and heated at 120 Cfor 3 h. After the cyanation reaction was completed, the resultingmixture was filtered. The filtrate was extracted with diethyl ether:waterat three times, and the organic phase dried on MgSO4. Finally, thedesired nitriles were obtained by evaporation of solvent, and they weresent to GC/MS, 1H NMR and 13C NMR analyses for characterizationstudies.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 645-00-1, its application will become more common.

Reference:
Article; Baran, Talat; Carbohydrate Polymers; vol. 237; (2020);,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

A common compound: 645-00-1, name is 1-Iodo-3-nitrobenzene, belongs to iodides-buliding-blocks compound, it can change the direction of chemical reaction, and react with certain compounds to generate new functional products. A new synthetic method of this compound is introduced below. 645-00-1

General procedure: A round bottom flask was charged with aryl halide (0.5 mmol) and terminal acetylene (0.6 mmol). To the mixture, Pd(OAc)2 (1 mol%), A4 (2 mol%) andK2CO3 (1.5 mmol) were added. The reaction mixture was stirred at roomtemperature in EtOH (4 mL) for the mentioned time. The formation of theproduct was confirmed by monitoring the TLC. The reaction mixture was thenextracted with ethyl acetate (3 10 mL). The extracted layer was dried overNa2SO4 and concentrated in rotary evaporator. The crude product was purifiedby column chromatography over silica gel (Eluent: n-hexane) to obtain thedesired product. The pure products were confirmed by 1H and 13C NMR.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 645-00-1, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Das, Sameeran Kumar; Sarmah, Manashi; Bora, Utpal; Tetrahedron Letters; vol. 58; 22; (2017); p. 2094 – 2097;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com