Category: 624-75-9

Application of 624-75-9, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 624-75-9 name is 2-Iodoacetonitrile, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

First, a stirrer was placed in a 35 mL sealed tube, and 35 muL of styrene (0.3 mmol), 1.0 ml of acetonitrile, and 44 muL of iodoacetonitrile (0.60 mmol) were added thereto, and 5·4 mg of Phen was added to the mixed solution. (0·03mmol), 5.7mgCul (0.03mmol) and 91yL DBU (0.60mmol), tightly seal the nozzle with a cock, heat to 110 C, stir for 1.5 hours, after the reaction is finished, the system is cooled to room temperature, into the reaction system 2 ml of distilled water was added, and the mixture was extracted with ethyl acetate. The organic phases were combined, and the solvent of the organic phase was evaporated under reduced pressure.36.5 mg of a colorless liquid product 3a was obtained by silica gel column chromatography, yield 85%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Iodoacetonitrile, and friends who are interested can also refer to it.

Related Products of 624-75-9,Some common heterocyclic compound, 624-75-9, name is 2-Iodoacetonitrile, molecular formula is C2H2IN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Cyanomethyl)trimethylphosphonium iodide was prepared according to the general method described in Zaragoza, F., et al., J. Org. Chem.2001, 66, 2518-2521. In a 1 L round bottom flask, trimethylphosphine in toluene (100 mL, 100 mmol) was diluted with THF (50.0 mL) and toluene (50.0 mL), and cooled on an ice bath. The reaction mixture was stirred vigorously while iodoacetonitrile (7 mL, 16.7 g, 68.3 mmol) was added dropwise to produce a tan precipitate. The cooling bath was removed and the reaction mixture was stirred overnight at room temperature. The flask was placed in a sonicator to break up any clumped solids. The reaction mixture was stirred an additional 4 hours. The solids were collected by filtration and dried under vacuum to give (1380) (cyanomethyl)trimethylphosphonium iodide (16.6 g, 68.3 mmol, 68.3 % yield). 1H NMR (400 MHz, DMSO-d6) 4.03 (d, J=16.4 Hz, 2H), 2.05 (d, J=15.4 Hz, 9H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Iodoacetonitrile, its application will become more common.

Adding a certain compound to certain chemical reactions, such as: 624-75-9, name is 2-Iodoacetonitrile, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 624-75-9, Quality Control of 2-Iodoacetonitrile

Example 112b Methyl 3-(Cyanomethyl)-5,6,7,8-tetrahydroindolizine-2-carboxylate 112b A 500-mL three-neck round-bottomed flask equipped with an addition funnel, thermometer and charged with 112a (6.70 g, 37.4 mmol), Iodoacetonitrile (12.5 g, 74.9 mmol), iron (II) sulfate heptahydrate (5.20 g, 18.7 mmol) and dimethyl sulfoxide (250 mL). Hydrogen peroxide (35%, 18.2 g, 187 mmol) was added dropwise to the mixture in 1 h through a syringe pump at room temperature using a water bath. Iron (II) sulfate heptahydrate (2 to 3 equivalent) was added to the reaction mixture in portions to keep the temperature between 25 C to 35 C, until the color of the reaction mixture is deep red. If TLC shows the reaction not completed, then more hydrogen peroxide (2-3 equivalent) and more iron (II) sulfate heptahydrate (1-2 equivalent) are added in the same manner until the reaction is completed. After that time, the reaction mixture was partitioned between saturated sodium bicarbonate solution (200 mL) and ethyl acetate (400 mL). The organic layer was separated, and the aqueous layer was extracted with ethyl acetate (2 * 100 mL). The combined organic layers were washed with saturated Sodium thiosulfate solution (50 mL), dried over sodium sulfate and concentrated under reduced pressure. The residue was purified by column chromatography to afford a 78% yield (6.40 g) of 112b as a yellow oil: 1H NMR (500 MHz, CDCl3) delta 6.23 (s, 1H), 4.23 (s, 2H), 3.94 (t, 2H, J = 6.5 Hz), 3.81 (s, 3H), 2.74 (t, 2H, J = 6.5 Hz), 2.00 (m, 2H), 1.83 (m, 2H); (APCI+) m/z 219.3 (M+H)

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Iodoacetonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; F.Hoffmann-La Roche AG; CRAWFORD, James John; ORTWINE, Daniel Fred; WEI, BinQing; YOUNG, Wendy B.; EP2773638; (2015); B1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 624-75-9, name is 2-Iodoacetonitrile, This compound has unique chemical properties. The synthetic route is as follows., Safety of 2-Iodoacetonitrile

Compound 6 (prepared according to B2. b) (30 mg) was dissolved in 20 ml of MECN, and iodo acetonitrile (1.0 eq. ) and K2CO3 (3 eq, 29 mg) were added. Stirring for 17 days at 20C. The MECN was evaporated and the residue was purified by preparative TLC using CHCL2/MEOH (9/1) as the eluent. Yield: compound 60 (52 %).

According to the analysis of related databases, 624-75-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; JANSSEN PHARMACEUTICA N.V.; ARTS, Frank, Xavier, Jozef, Herwig; WO2005/28479; (2005); A2;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 624-75-9, name is 2-Iodoacetonitrile, This compound has unique chemical properties. The synthetic route is as follows., SDS of cas: 624-75-9

General procedure: Starting amine (5.0 mmol) was dissolved in dry diethyl ether (17 mL) and iodoacetonitrile (5.5 mmol, 919 mg) was added dropwise under cooling. The mixture was stirred at room temperature for 3-14 days, then precipitate was filtered off, washed with diethyl ether and dried in vacuo to give the corresponding quaternary ammonium salt 2. If the solid precipitate was not formed after 7 days, the mixture was evaporated under reduced pressure. The crude product was washed with diethyl ether (3 ¡Á 15mL) and dried in vacuo. The quaternary ammonium salt 2 was used in the next step without additional purification. The corresponding quaternary ammonium salt (3.0 mmol) was heated at 150 C on oil bath in freshly distilled DMF (7 mL) in a 25 mL round-bottom flask fitted with reflux condenser and CaCl2-tube for 15 minutes. The mixture was cooled to room temperature, diluted with H2O (20 mL) and extracted with PhMe (2 ¡Á 15mL). The organic phase then was washed with H2O (2 ¡Á 15mL) and brine (15 mL), dried over Na2SO4 and evaporated in vacuo to give the desired aminoacetonitrile 4. The latter, if necessary, was purified by column chromatography (it is convenient to visualize aminoacetonitriles on TLC-plate by treating with the diluted solution of ninhydrin in EtOH). Note, that aminoacetonitriles are moisture sensitive. Products after column chromatography were additionally dried by the addition of dry PhMe (5 mL) and evaporation in vacuo.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 624-75-9.

Reference:
Article; Buev, Evgeny M.; Smorodina, Anastasia A.; Stepanov, Maxim A.; Moshkin, Vladimir S.; Sosnovskikh, Vyacheslav Y.; Tetrahedron Letters; vol. 59; 17; (2018); p. 1638 – 1641;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 624-75-9 as follows. Safety of 2-Iodoacetonitrile

General procedure: Individual solutions of secondary N-alpha-trimethylsilylmethyl-N-benzylamines19 (5mmol) in acetonitrile (100mL) containing K2CO3 (10mmol) and 2-iodoacetonitrile (4.5mmol) were stirred for 12hat room temperature and concentrated in vacuo to give residues that were partitioned between water and CH2Cl2. The CH2Cl2 layers were dried and concentrated in vacuo to afford residues that were subjected to silica gel column chromatography (EtOAc/hexane=1: 15 – 1: 30) to yield corresponding alpha-aminonitiriles 11a18 (91%), 11b (74%), 11c (78%), 11d (85%), 11e (75%), 11f (75%), 11g (74%), 11h (75%), 11i (78%), 11j (78%) and 11k (66%).

According to the analysis of related databases, 624-75-9, the application of this compound in the production field has become more and more popular.

Reference:
Article; Lim, Suk Hyun; Cho, Dae Won; Choi, Jungkweon; An, Hyunjun; Shim, Jun Ho; Mariano, Patrick S.; Tetrahedron; vol. 73; 44; (2017); p. 6249 – 6261;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 624-75-9, name is 2-Iodoacetonitrile, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 624-75-9, Quality Control of 2-Iodoacetonitrile

General procedure: Individual solutions of secondary N-alpha-trimethylsilylmethyl-N-benzylamines19 (5mmol) in acetonitrile (100mL) containing K2CO3 (10mmol) and 2-iodoacetonitrile (4.5mmol) were stirred for 12hat room temperature and concentrated in vacuo to give residues that were partitioned between water and CH2Cl2. The CH2Cl2 layers were dried and concentrated in vacuo to afford residues that were subjected to silica gel column chromatography (EtOAc/hexane=1: 15 – 1: 30) to yield corresponding alpha-aminonitiriles 11a18 (91%), 11b (74%), 11c (78%), 11d (85%), 11e (75%), 11f (75%), 11g (74%), 11h (75%), 11i (78%), 11j (78%) and 11k (66%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Lim, Suk Hyun; Cho, Dae Won; Choi, Jungkweon; An, Hyunjun; Shim, Jun Ho; Mariano, Patrick S.; Tetrahedron; vol. 73; 44; (2017); p. 6249 – 6261;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Application of 624-75-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 624-75-9, name is 2-Iodoacetonitrile belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

The compound obtained in Example 64 (4.6 g, 15.35 mmol) and potassium carbonate (10.6 g, 76.73 mmol) were added to acetone (100 mL) and refluxed for 2 hours. To this reaction mixture was dropwise added iodoacetonitrile (1.34 mL, 18.42 mmol), and refluxed over 2 hours. The acetone was removed by vacuum distillation, and the residue was treated in water (200 mL) and ethyl acetate (200 mL). The organic layer was dried over anhydrous magnesium sulfate and distillated in a vacuum. The concentrate was subjected to column chromatography (silica gel, ethyl acetate-hexane 2:3 v/v) to afford a mixture of 2:1 of regioisomers as yellow oil. These two regioisomers (4.16 g, 80%) were used in the next reaction step without separation.Example 65-2Preparation of 4-(2-chloropyridin-5-yl)-5-(3-methoxy-5-methylphenyl)-pyrazol-1-yl)acetonitrile1H NMR (CDCl3) delta 2.28 (s, 3H), 3.66 (s, 3H), 5.16 (s, 2H), 6.71 (s, 2H), 6.84 (s, 1H), 7.24 (d, J=8.3 Hz, 1H), 7.49 (dd, J=2.3, 5.9 Hz, 1H), 7.70 (s, 1H, 8.32 (s, 1H); 13C NMR (CDCl3) delta 21.57, 39.89, 55.23, 110.80, 113.76, 115.28, 117.76, 121.47, 124.02, 127.24, 129.92, 132.57, 138.58, 140.12, 148.71, 149.92, 151.17, 159.69, 162.33.To a solvent mixture of THF and water (4:1, 10 mL) were added the mixture prepared in Example 65 (0.3 g, 0.89 mmol), 2-acetylphenylboronic acid (0.18 g, 1.07 mmol), dichlorobis(triphenylphosphine)palladium (II) (32 mg, 0.05 mmol) and potassium carbonate(0.13 g, 0.89 mmol). The reaction system was purged with nitrogen gas for 10 min, and stirred at 70 C. for 12 hours under nitrogen atmosphere. The reaction mixture was cooled to room temperature, washed with ice water (100 mL) and extracted with ethyl acetate (100 mL¡Á3). The organic extract was dried over anhydrous magnesium sulfate and distilled under vacuum. The residue was subjected to prep-TLC using a solvent mixture of ethyl acetate/hexane to purify the desired products.Purification yield by prep-TLC (silica gel, ethyl acetate-hexane, 1:2, v/v): (72 mg); m.p. 72-73 C.; 1H NMR (CDCl3) delta 2.18 (s, 3H), 2.36 (s, 3H), 3.78 (s, 3H), 4.95 (s, 2H), 6.68 (s, 1H), 6.75 (s, 1H), 6.86 (s, 1H), 7.43-7.59 (m, 6H), 7.91 (s, 1H), 8.49 (s, 1H); 13C NMR (CDCl3) delta 21.55, 30.49, 37.81, 55.38, 112.37, 114.78, 116.72, 118.33, 122.13, 122.67, 126.78, 127.62, 128.64, 128.92, 128.99, 130.26, 134.89, 138.22, 139.49, 141.23, 141.33, 141.58, 147.50, 155.33, 160.40, 204.23.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Iodoacetonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; LEE, So Ha; Yoo, Kyung Ho; Oh, Chang Hyun; Han, Dong Keun; El-Deeb, Ibrahim Mustafa; Park, Byung Sun; Jung, Su Jin; US2011/15395; (2011); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 624-75-9, name is 2-Iodoacetonitrile belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Computed Properties of C2H2IN

General procedure: Starting amine (5.0 mmol) was dissolved in dry diethyl ether (17 mL) and iodoacetonitrile (5.5 mmol, 919 mg) was added dropwise under cooling. The mixture was stirred at room temperature for 3-14 days, then precipitate was filtered off, washed with diethyl ether and dried in vacuo to give the corresponding quaternary ammonium salt 2. If the solid precipitate was not formed after 7 days, the mixture was evaporated under reduced pressure. The crude product was washed with diethyl ether (3 ¡Á 15mL) and dried in vacuo. The quaternary ammonium salt 2 was used in the next step without additional purification. The corresponding quaternary ammonium salt (3.0 mmol) was heated at 150 C on oil bath in freshly distilled DMF (7 mL) in a 25 mL round-bottom flask fitted with reflux condenser and CaCl2-tube for 15 minutes. The mixture was cooled to room temperature, diluted with H2O (20 mL) and extracted with PhMe (2 ¡Á 15mL). The organic phase then was washed with H2O (2 ¡Á 15mL) and brine (15 mL), dried over Na2SO4 and evaporated in vacuo to give the desired aminoacetonitrile 4. The latter, if necessary, was purified by column chromatography (it is convenient to visualize aminoacetonitriles on TLC-plate by treating with the diluted solution of ninhydrin in EtOH). Note, that aminoacetonitriles are moisture sensitive. Products after column chromatography were additionally dried by the addition of dry PhMe (5 mL) and evaporation in vacuo.

The synthetic route of 624-75-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Buev, Evgeny M.; Smorodina, Anastasia A.; Stepanov, Maxim A.; Moshkin, Vladimir S.; Sosnovskikh, Vyacheslav Y.; Tetrahedron Letters; vol. 59; 17; (2018); p. 1638 – 1641;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 624-75-9, name is 2-Iodoacetonitrile, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 624-75-9, Formula: C2H2IN

A mixture of (2S,2’S)-3,3′-((((2,2′-dimethyl-[1,1′-biphenyl]-3,3′- diyl)bis(oxy))bis(propane-3,1-diyl))bis(azanediyl))bis(propane-1,2-diol) (Example 2079, 20 mg, 0.042 mmol) and 2-iodoacetonitrile (20 mul, 0.276 mmol) in methanol (1 mL) and N,N-diisopropylethylamine (50 muL, 0.286 mmol) was heated at 65 C for 4 h. The crude material was purified via preparative LC/MS with the following conditions: Column: XBridge C18, 19 x 200 mm, 5-mum particles;Mobile Phase A: 5:95 acetonitrile: water with 10-mM ammonium acetate; Mobile Phase B: 95:5 acetonitrile: water with 10-mM ammonium acetate; Gradient: 25-65% B over 15 minutes, then a 5-minute hold at 100% B; Flow: 20 mL/min to give the pure title compound: (16.1 mg, 64%). LC/MS Condition E: ret time 1.65 min; m/e = 555 (M+H)+. LC/MS Condition F: ret time 1.45 min; m/e = 555 (M+H)+.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Iodoacetonitrile, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; BRISTOL-MYERS SQUIBB COMPANY; YEUNG, Kap-Sun; GRANT-YOUNG, Katharine A.; ZHU, Juliang; SAULNIER, Mark G.; FRENNESSON, David B.; LANGLEY, David R.; HEWAWASAM, Piyasena; WANG, Tao; ZHANG, Zhongxing; MENG, Zhaoxing; SUN, Li-Qiang; MULL, Eric; SCOLA, Paul Michael; (370 pag.)WO2018/44963; (2018); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com