Category: 28903-71-1

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Zhang, Lei; Ye, Daixin; Huang, Qiu-An; Zhao, Hongbin; Shao, Qinsi; Zhang, Jiujun researched the compound: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II)( cas:28903-71-1 ).Application of 28903-71-1.They published the article 《Pyrolyzed Co-Nx/C electrocatalysts supported on different carbon materials for oxygen reduction reaction in neutral solution》 about this compound( cas:28903-71-1 ) in Journal of the Electrochemical Society. Keywords: pyrolyzed cobalt porphine carbon support electrocatalyst oxygen reduction. We’ll tell you more about this compound (cas:28903-71-1).

In this work, a non-noble metal material, i.e., 5, 10, 15, 20-Tetrakis(4-methoxyphenyl)-21H, 23H-porphine cobalt(II) (CoTMPP), is chosen as the metal complex which adsorbs on three different carbon support materials, namely, black pearls 2000 (BP), ordered mesoporous carbon (MPC) and single layer graphene oxide (GO), to form CoTMPP/BP, CoTMPP/MPC, and CoTMPP/GO catalyst precursors, resp. These precursors are heat-treated at high temperatures to form Co-Nx/BP, Co-Nx/MPC, and Co-Nx/GO catalysts for ORR in neutral electrolyte solution, resp. Several characterization methods including XRD, SEM/TEM and XPS are employed. Electrochem. methods such as cyclic voltammetry (CV), rotating disk electrode (RDE) and rotating ring-disk electrode (RRDE) techniques are used to quant. measure the catalyzed ORR kinetic parameters. Effects of both carbon supports and heat-treatment temperature on the catalyst phys. properties and catalytic ORR activities were also studied. Regarding the catalytic ORR activity, the activity order was measured as: Co-Nx/BP > Co-Nx/MPC > Co-Nx/GO. The overall electron transfer number catalyzed by Co-Nx/BP is measured to be 4, while those by Co-Nx/MPC and Co-Nx/GO catalysts are 2-electron transfer pathways. Based on these measurements and our anal., an ORR mechanism is also proposed for facilitating further investigation and understanding.

When you point to this article, it is believed that you are also very interested in this compound(28903-71-1)Application of 28903-71-1 and due to space limitations, I can only present the most important information.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Formula: C48H38CoN4O4. The fused heterocycle is formed by combining a benzene ring with a single heterocycle, or two or more single heterocycles. Compound: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II), is researched, Molecular C48H38CoN4O4, CAS is 28903-71-1, about Selective Aerobic Oxidation of 4-Ethylnitrobenzene to 4-Nitroacetophenone Promoted by Metalloporphyrins. Author is Yang, Yuning; Li, Guijie; Mao, Xinbiao; She, Yuanbin.

A solvent-free and environment-friendly process for the oxidation of 4-ethylnitrobenzene to 4-nitroacetophenone promoted by metalloporphyrins was developed in a pressure reactor using O2 as a clean oxidant. The activities and reaction selectivities of the metalloporphyrins could be significantly affected by their central metal ions as well as the nature and position of the substituted groups, which were systematically investigated by employing more than 60 metalloporphyrins. Generally, the Fe(III)- and Mn(II)-porphyrins exhibited high activities. Moreover, metalloporphyrins with electron-withdrawing substituents on the para-positions of the Ph rings showed activities in the order T(p-Br)PPM < T(p-Cl)PPM < T(p-F)PPM. The substituent position effect on the activities of T(o-Cl)PPM > T(m-Cl)PPM > T(p-Cl)PPM and T(o-OMe)PPM < T(m-OMe)PPM < T(p-OMe)PPM were observed Furthermore, selectivities over 90.0% and a TON of 5370 could be achieved for the desired ketone. Especially, the T(p-Cl)PPMn demonstrated a selectivity of up to 93.6% and a conversion of 51.9% with only 3.3% acid and no alc. observed, and the selectivity was nearly the same for a large-scale experiment (100 g). As far as I know, this compound(28903-71-1)Formula: C48H38CoN4O4 can be applied in many ways, which is helpful for the development of experiments. Therefore many people are doing relevant researches.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Name: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II). The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II), is researched, Molecular C48H38CoN4O4, CAS is 28903-71-1, about Metalloporphyrin as a Biomimetic Catalyst for the Catalytic Oxidative Degradation of Lignin to Produce Aromatic Monomers. Author is Xie, Jinfeng; Ma, Guanfeng; Ouyang, Xinping; Zhao, Lisha; Qiu, Xueqing.

Lignin, an abundant biomass waste, was degraded under microwave irradiation with H2O2 as the oxidant and metalloporphyrin as the catalyst. The effect of substituent group (4-methylphenyl, 4-methoxyphenyl, 4-bromophenyl and 4-carboxyphenyl) at the meso-benzene ring of metalloporphyrin, central metal ion (Co, Mn, Ni and Fe) and axial ligand (chlorine, p-hydroxypyridine, p-pyridinecarboxaldehyde) on the degradation of lignin was investigated. The electron-withdrawing group not only reduces the electron cloud d. on the porphyrin ring, but also promotes the formation of higher active intermediate [(Porp)MeIV=O]+·. Therefore, the presence of stronger electron-withdrawing substituents makes the metalloporphyrins more efficient in lignin degradation Compared to Co porphyrin, there are less amount of [(Porp)MeIV=O]+· formed when Mn, Fe or Ni porphyrin was used as the catalyst for degrading lignin. Consequently, Co porphyrin contributed to a higher YAM (the yield of aromatic monomers). The strong nucleophilicity and the low steric hindrance of axial ligand was advantageous for the stability of metalloporphyrins, which is favorable for improving the catalytic activity to the degradation of lignin. It is found that the YAM increases 20.1% from 5.6% by using CoTBrPPCl as the reaction catalyst under the optimized conditions.

This literature about this compound(28903-71-1)Name: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II)has given us a lot of inspiration, and I hope that the research on this compound(5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II)) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called Exploring illumination effect on the impedance spectroscopy and dielectric dispersion of 5, 10, 15, 20-tetrakis(4-methoxyphenyl)-21H, 23H-porphine cobalt(II)/silicon heterojunction photovoltaic, published in 2020-08-31, which mentions a compound: 28903-71-1, Name is 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II), Molecular C48H38CoN4O4, Recommanded Product: 28903-71-1.

Abstract: The dynamic properties of a hybrid heterojunction based on a small mol. of 5, 10, 15, 20-tetrakis (4-methoxyphenyl)-21H, 23H-porphine cobalt(II), CoTMPP, grown onto p-Si wafer have been studied using impedance spectroscopy (IS) at various frequency range (102-106 Hz) under different illumination intensities (0-24 mW/cm2) at room temperature The fabricated Al/p-Si/CoTMPP/Au heterojunction performs two relaxation processes associated with Al/p-Si and p-Si/CoTMPP interfaces are attributed to a Maxwell-Wagner-Sillars (MWS) effect causes charge accumulation at interfacial regions. With increasing illumination intensity, the MWS effect enhances and leads to more accumulated charges at the interfacial regions. Based on Nyquist plots fitting, the equivalent circuit of the fabricated device was modeled. The dielec. dispersion, elec. modulus, relaxation process and elec. conductivity were investigated under different illuminations. The present results revealed an excellent photoresponse and photo-resistive of the Al/p-Si/CoTMPP/Au device as a candidate for photovoltaic devices and optoelectronics applications.

This literature about this compound(28903-71-1)Recommanded Product: 28903-71-1has given us a lot of inspiration, and I hope that the research on this compound(5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II)) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

COA of Formula: C48H38CoN4O4. So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic. Compound: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II), is researched, Molecular C48H38CoN4O4, CAS is 28903-71-1, about Can a Nitrosyl of a Mn(II)-Porphyrin Complex Release Nitroxyl/HNO?.

In general, the nitrosyl complexes of Mn(II)-porphyrinate having the {Mn(NO)}6 configuration are not considered as HNO or nitroxyl (NO-) donors because of [MnI-NO+] nature. A nitrosyl complex of Mn(II)-porphyrin, [Mn(TMPP2-)(NO)], [1, TMPPH2 = 5,10,15,20-tetrakis-4-methoxyphenylporphyrin], is shown to release HNO in the presence of HBF4. It is evidenced from the characteristic reaction of HNO with PPh3 and isolation of the [(TMPP2-)MnIII(H2O)2](BF4) (2). This is attributed to the fact that H+ from HBF4 polarizes the NO group whereas BF4- interacts with metal ion to stabilize the Mn(III) form. These two effects cooperatively result in the release of HNO from 1. Complex 1 behaves as a nitroxyl (NO-) donor in the presence of [Fe(dtc)3] (dtc = diethyldithiocarbamate anion) and [Fe(TPP)(Cl)] (TPP = 5,10,15,20-tetraphenylporphyrinate) to result in [Fe(dtc)2(NO)] and [Fe(TPP)(NO)], resp.

This literature about this compound(28903-71-1)COA of Formula: C48H38CoN4O4has given us a lot of inspiration, and I hope that the research on this compound(5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II)) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

HPLC of Formula: 28903-71-1. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II), is researched, Molecular C48H38CoN4O4, CAS is 28903-71-1, about Efficient oxidation of cycloalkanes with simultaneously increased conversion and selectivity using O2 catalyzed by metalloporphyrins and boosted by Zn(AcO)2: A practical strategy to inhibit the formation of aliphatic diacids. Author is Shen, Hai-Min; Wang, Xiong; Ning, Lei; Guo, A-Bing; Deng, Jin-Hui; She, Yuan-Bin.

The direct sources of aliphatic acids in cycloalkanes oxidation were investigated, and a strategy to suppress the formation of aliphatic acids was adopted through enhancing the catalytic transformation of oxidation intermediates cycloalkyl hydroperoxides to cycloalkanols by Zn(II) and delaying the emergence of cycloalkanones. Benefitted from the delayed formation of cycloalkanones and suppressed non-selective thermal decomposition of cycloalkyl hydroperoxides, the conversion of cycloalkanes and selectivity towards cycloalkanols and cycloalkanones were increased simultaneously with satisfying tolerance to both of metalloporphyrins and substrates. For cyclohexane, the selectivity towards KA-oil was increased from 80.1% to 96.9% meanwhile the conversion was increased from 3.83% to 6.53%, a very competitive conversion level with higher selectivity compared with current industrial process.

This literature about this compound(28903-71-1)HPLC of Formula: 28903-71-1has given us a lot of inspiration, and I hope that the research on this compound(5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II)) can be further advanced. Maybe we can get more compounds in a similar way.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Andrei, Virgil; Reuillard, Bertrand; Reisner, Erwin published the article 《Bias-free solar syngas production by integrating a molecular cobalt catalyst with perovskite-BiVO4 tandems》. Keywords: solar syngas cobalt catalyst perovskite bismuth vanadium oxide.They researched the compound: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II)( cas:28903-71-1 ).Synthetic Route of C48H38CoN4O4. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:28903-71-1) here.

The photoelectrochem. (PEC) production of syngas from water and CO2 represents an attractive technol. towards a circular carbon economy. However, the high overpotential, low selectivity and cost of commonly employed catalysts pose challenges for this sustainable energy-conversion process. Here we demonstrate highly tunable PEC syngas production by integrating a cobalt porphyrin catalyst immobilized on carbon nanotubes with triple-cation mixed halide perovskite and BiVO4 photoabsorbers. Empirical data anal. is used to clarify the optimal electrode selectivity at low catalyst loadings. The perovskite photocathodes maintain selective aqueous CO2 reduction for one day at light intensities as low as 0.1 sun, which provides pathways to maximize daylight utilization by operating even under low solar irradiance. Under 1 sun irradiation, the perovskite-BiVO4 PEC tandems sustain bias-free syngas production coupled to water oxidation for three days. The devices present solar-to-H2 and solar-to-CO conversion efficiencies of 0.06 and 0.02%, resp., and are able to operate as standalone artificial leaves in neutral pH solution

In addition to the literature in the link below, there is a lot of literature about this compound(5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II))Synthetic Route of C48H38CoN4O4, illustrating the importance and wide applicability of this compound(28903-71-1).

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

COA of Formula: C48H38CoN4O4. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II), is researched, Molecular C48H38CoN4O4, CAS is 28903-71-1, about Selective Solvent-Free and Additive-Free Oxidation of Primary Benzylic C-H Bonds with O2 Catalyzed by the Combination of Metalloporphyrin with N-Hydroxyphthalimide. Author is Shen, Hai-Min; Qi, Bei; Hu, Meng-Yun; Liu, Lei; Ye, Hong-Liang; She, Yuan-Bin.

A protocol for solvent-free and additive-free oxidation of primary benzylic C-H bonds with O2 was presented through adjusting the combination of metalloporphyrins and NHPI as binary catalysts to overcome the deficiencies encountered in current oxidation systems. The effects of reaction temperature, porphyrin structure, central metal, catalyst loading and O2 pressure were investigated systematically. For the optimized combination of T(2-OCH3)PPCo and NHPI, all the primary benzylic C-H bonds could be functionalized efficiently and selectively at 120°C and 1.0 MPa O2 with aromatic acids as the primary products. The selectivity towards aromatic acids could reach up to 70-95% in the conversion of more than 30% for most of the substrates possessing primary benzylic C-H bonds in the metalloporphyrin loading of 0.012% (mol/mol). And the superior performance of T(2-OCH3)PPCo among the metalloporphyrins investigated was mainly attributed to its high efficiency in charge transfer and fewer pos. charges around central metal Co (II) which favored the adduction of O2 to cobalt (II) forming the high-valence metal-oxo complex followed by the production of phthalimide N-oxyl radical (PINO) and the initiation of the catalytic oxidation cycle. This work would provide not only an efficient protocol in utilization of hydrocarbons containing primary benzylic C-H bonds, but also a significant reference in the construction of more efficient C-H bonds oxidation systems.

In addition to the literature in the link below, there is a lot of literature about this compound(5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II))COA of Formula: C48H38CoN4O4, illustrating the importance and wide applicability of this compound(28903-71-1).

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Wang, Yu-Heng; Schneider, Patrick E.; Goldsmith, Zachary K.; Mondal, Biswajit; Hammes-Schiffer, Sharon; Stahl, Shannon S. researched the compound: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II)( cas:28903-71-1 ).SDS of cas: 28903-71-1.They published the article 《Bronsted Acid Scaling Relationships Enable Control Over Product Selectivity from O2 Reduction with a Mononuclear Cobalt Porphyrin Catalyst》 about this compound( cas:28903-71-1 ) in ACS Central Science. Keywords: Broensted acid selectivity product oxygen reduction cobalt porphyrin catalyst. We’ll tell you more about this compound (cas:28903-71-1).

The selective reduction of O2, typically with the goal of forming H2O, represents a long-standing challenge in the field of catalysis. Macrocyclic transition-metal complexes, and cobalt porphyrins in particular, have been the focus of extensive study as catalysts for this reaction. Here, we show that the mononuclear Co-tetraarylporphyrin complex, Co(porOMe) (porOMe = meso-tetra(4-methoxyphenyl)porphyrin), catalyzes either 2e-/2H+ or 4e-/4H+ reduction of O2 with high selectivity simply by changing the identity of the Bronsted acid in DMF. The thermodn. potentials for O2 reduction to H2O2 or H2O in DMF are determined and exhibit a Nernstian dependence on the acid pKa, while the CoIII/II redox potential is independent of the acid pKa. The reaction product, H2O or H2O2, is defined by the relationship between the thermodn. potential for O2 reduction to H2O2 and the CoIII/II redox potential: selective H2O2 formation is observed when the CoIII/II potential is below the O2/H2O2 potential, while H2O formation is observed when the CoIII/II potential is above the O2/H2O2 potential. Mechanistic studies reveal that the reactions generating H2O2 and H2O exhibit different rate laws and catalyst resting states, and these differences are manifested as different slopes in linear free energy correlations between the log(rate) vs. pKa and log(rate) vs. effective overpotential for the reactions. This work shows how scaling relationships may be used to control product selectivity, and it provides a mechanistic basis for the pursuit of mol. catalysts that achieve low overpotential reduction of O2 to H2O.

In addition to the literature in the link below, there is a lot of literature about this compound(5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II))SDS of cas: 28903-71-1, illustrating the importance and wide applicability of this compound(28903-71-1).

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic.Shehata, M. M.; Makhlouf, M. M.; Kamal, H.; Abdelhady, K. researched the compound: 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II)( cas:28903-71-1 ).Reference of 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II).They published the article 《Constructive impact of temperature and frequency on electrical transport performance of cobalt tetramethoxyphenylporphyrin/p-Si hybrid heterojunction solar cell》 about this compound( cas:28903-71-1 ) in Journal of Alloys and Compounds. Keywords: cobalt tetramethoxyphenylporphyrin silicon hybrid heterojunction solar cell elec transport; solar cell temperature frequency constructive impact elec transport. We’ll tell you more about this compound (cas:28903-71-1).

Thin films of cobalt tetramethoxyphenylporphyrin, CoTMPP, have been prepared via thermal evaporation method. X-ray anal. exhibits the polycrystalline and amorphous structural formation for the powder form and the film of CoTMPP, resp. Micrographs of SEM reveal that the CoTMPP film is consisting of nanoparticles like spheres structure (15-28 nm) embedded in amorphous matrix. UV-Vis absorption spectroscopy of as-deposited film has been recorded and from which the Sort and Q bands are observed in a wide range of UV-Vis spectrum. Two others weak bands labeled M and N are detected in UV spectral region. In addition, the film of CoTMPP is grown on the single crystal of p-silicon (p-Si) substrate to fabricate Au/CoTMPP/p-Si/Al hybrid heterojunction solar cell. Complex impedance spectroscopy of the fabricated device is investigated from which, Nyquest spectrum is analyzed at different temperatures ranged from 300 to 380 K. The frequency dependent of the imaginary impedance and the elec. modulus exhibit relaxation phenomena that attributed to the CoTMPP/p-Si and p-Si/Al interfaces, resp. Many elec. parameters including activation energies, depletion width, life times, diffusion coefficients and mobility of the charge carriers were determined and interpreted at these interfaces.

In addition to the literature in the link below, there is a lot of literature about this compound(5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II))Reference of 5,10,15,20-Tetrakis (4-methoxyphenyl)-21H,23H-porphine cobalt (II), illustrating the importance and wide applicability of this compound(28903-71-1).

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com