Category: 23307-72-4

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Recueil de Medecine Veterinaire called Anticoccidial power of sulfachlorpyrazine (Esb 3) against Eimeria acervulina, Author is Yvore, P.; Peloille, Michele; Jacquemot, Catherine, which mentions a compound: 23307-72-4, SMILESS is ClC1=CN=CC([N-]S(=O)(C2=CC=C(N)C=C2)=O)=N1.[Na+], Molecular C10H8ClN4NaO2S, Name: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide.

Sulfachloropyrid-azine has the advantages of the greater efficiency and less toxicity compared with sulphaquinoxaline and sulphamethazine. With 300 mg./l. drinking water a significant anticoccidial activity in the chicken was observed and with 600 mg./l. for 5 days (administration during 3 days, no treatment during 4 days and retreatment for 2 days) no toxic effects were observed. Low doses seem to have coccidiocidal activity on 2nd schizogony. The new anticoccidial derivatives of hydroxyquinoline do not produce any immunity. Particularly E. tenella may develop again after the chemotherapy. It is possible that a complementary treatment by a sulfonamide in the drinking water during the days following the treatment may produce immunity. For this a coccidiocidal and not a coccidiostatic action should be achieved.

After consulting a lot of data, we found that this compound(23307-72-4)Name: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide can be used in many types of reactions. And in most cases, this compound has more advantages.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Most of the compounds have physiologically active properties, and their biological properties are often attributed to the heteroatoms contained in their molecules, and most of these heteroatoms also appear in cyclic structures. A Journal, Recueil de Medecine Veterinaire called Anticoccidial power of sulfachlorpyrazine (Esb 3) against Eimeria acervulina, Author is Yvore, P.; Peloille, Michele; Jacquemot, Catherine, which mentions a compound: 23307-72-4, SMILESS is ClC1=CN=CC([N-]S(=O)(C2=CC=C(N)C=C2)=O)=N1.[Na+], Molecular C10H8ClN4NaO2S, Name: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide.

Sulfachloropyrid-azine has the advantages of the greater efficiency and less toxicity compared with sulphaquinoxaline and sulphamethazine. With 300 mg./l. drinking water a significant anticoccidial activity in the chicken was observed and with 600 mg./l. for 5 days (administration during 3 days, no treatment during 4 days and retreatment for 2 days) no toxic effects were observed. Low doses seem to have coccidiocidal activity on 2nd schizogony. The new anticoccidial derivatives of hydroxyquinoline do not produce any immunity. Particularly E. tenella may develop again after the chemotherapy. It is possible that a complementary treatment by a sulfonamide in the drinking water during the days following the treatment may produce immunity. For this a coccidiocidal and not a coccidiostatic action should be achieved.

After consulting a lot of data, we found that this compound(23307-72-4)Name: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide can be used in many types of reactions. And in most cases, this compound has more advantages.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Recommanded Product: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide. So far, in addition to halogen atoms, other non-metallic atoms can become part of the aromatic heterocycle, and the target ring system is still aromatic. Compound: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide, is researched, Molecular C10H8ClN4NaO2S, CAS is 23307-72-4, about Study of the interaction between sodium salts of (2E)-3-(4′-halophenyl)prop-2-enoyl sulfachloropyrazine and bovine serum albumin by fluorescence spectroscopy.

Three sodium salts of (2E)-3-(4′-halophenyl)prop-2-enoyl sulfachloropyrazine (CCSCP) were synthesized and their structures were determined by 1H and 13C NMR, LC-MS and IR. The binding properties between CCSCPs and bovine serum albumin (BSA) were studied using fluorescence spectroscopy in combination with UV-vis absorbance spectroscopy. The results indicate that the fluorescence quenching mechanisms between BSA and CCSCPs were static quenching at low concentrations of CCSCPs or combined quenching (static and dynamic) at higher CCSCP concentrations of 298, 303 and 308 K. The binding constants, binding sites and corresponding thermodn. parameters (ΔH, ΔS, ΔG) were calculated at different temperatures All ΔG values were neg., which revealed that the binding processes were spontaneous. Although all CCSCPs had neg. ΔH and pos. ΔS, the contributions of ΔH and ΔS to ΔG values were different. When the 4′-substituent was fluorine or chlorine, van der Waals interactions and hydrogen bonds were the main interaction forces. However, when the halogen was bromine, ionic interaction and proton transfer controlled the overall energetics. The binding distances between CCSCPs and BSA were determined using the Foerster non-radiation energy transfer theory and the effects of CCSCPs on the conformation of BSA were analyzed by synchronous fluorescence spectroscopy. Copyright © 2012 John Wiley & Sons, Ltd.

Although many compounds look similar to this compound(23307-72-4)Recommanded Product: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide, numerous studies have shown that this compound(SMILES:ClC1=CN=CC([N-]S(=O)(C2=CC=C(N)C=C2)=O)=N1.[Na+]), has unique advantages. If you want to know more about similar compounds, you can read my other articles.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In organic chemistry, atoms other than carbon and hydrogen are generally referred to as heteroatoms. The most common heteroatoms are nitrogen, oxygen and sulfur. Now I present to you an article called Atom, atom-type, and total nonstochastic and stochastic quadratic fingerprints: a promising approach for modeling of antibacterial activity, published in 2005-04-15, which mentions a compound: 23307-72-4, mainly applied to antibacterial screening QSAR model, Recommanded Product: 23307-72-4.

The Topol. Mol. Computer Design (TOMOCOMD-CARDD) approach has been introduced for the classification and design of antimicrobial agents using computer-aided mol. design. For this propose, atom, atom-type, and total quadratic indexes have been generalized to codify chem. structure information. In this sense, stochastic quadratic indexes have been introduced for the description of the mol. structure. These stochastic fingerprints are based on a simple model for the intramol. movement of all valence-bond electrons. In this work, a complete data set containing 1006 antimicrobial agents is collected and presented. Two structure-based antibacterial activity classification models have been generated. The models (including nonstochastic and stochastic indexes) classify correctly more than 90% of 1525 compounds in training sets. These models permit the correct classification of 92.28% and 89.31% of 505 compounds in an external test sets. The approach, also, satisfactorily compares with respect to nine of the most useful models for antimicrobial selection reported to date. Finally, a virtual screening of 87 new compounds reported in the anti-infective field with antibacterial activities is developed showing the ability of the models to identify new leads as antibacterial.

Compounds in my other articles are similar to this one(Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide)Recommanded Product: 23307-72-4, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Epoxy compounds usually have stronger nucleophilic ability, because the alkyl group on the oxygen atom makes the bond angle smaller, which makes the lone pair of electrons react more dissimilarly with the electron-deficient system. Compound: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide, is researched, Molecular C10H8ClN4NaO2S, CAS is 23307-72-4, about Study of the interaction between sodium salts of (2E)-3-(4′-halophenyl)prop-2-enoyl sulfachloropyrazine and bovine serum albumin by fluorescence spectroscopy.Related Products of 23307-72-4.

Three sodium salts of (2E)-3-(4′-halophenyl)prop-2-enoyl sulfachloropyrazine (CCSCP) were synthesized and their structures were determined by 1H and 13C NMR, LC-MS and IR. The binding properties between CCSCPs and bovine serum albumin (BSA) were studied using fluorescence spectroscopy in combination with UV-vis absorbance spectroscopy. The results indicate that the fluorescence quenching mechanisms between BSA and CCSCPs were static quenching at low concentrations of CCSCPs or combined quenching (static and dynamic) at higher CCSCP concentrations of 298, 303 and 308 K. The binding constants, binding sites and corresponding thermodn. parameters (ΔH, ΔS, ΔG) were calculated at different temperatures All ΔG values were neg., which revealed that the binding processes were spontaneous. Although all CCSCPs had neg. ΔH and pos. ΔS, the contributions of ΔH and ΔS to ΔG values were different. When the 4′-substituent was fluorine or chlorine, van der Waals interactions and hydrogen bonds were the main interaction forces. However, when the halogen was bromine, ionic interaction and proton transfer controlled the overall energetics. The binding distances between CCSCPs and BSA were determined using the Foerster non-radiation energy transfer theory and the effects of CCSCPs on the conformation of BSA were analyzed by synchronous fluorescence spectroscopy. Copyright © 2012 John Wiley & Sons, Ltd.

Compounds in my other articles are similar to this one(Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide)Related Products of 23307-72-4, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of C10H8ClN4NaO2S. The protonation of heteroatoms in aromatic heterocycles can be divided into two categories: lone pairs of electrons are in the aromatic ring conjugated system; and lone pairs of electrons do not participate. Compound: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide, is researched, Molecular C10H8ClN4NaO2S, CAS is 23307-72-4, about A self-assembly pipette tip graphene solid-phase extraction coupled with liquid chromatography for the determination of three sulfonamides in environmental water. Author is Sun, Ning; Han, Yehong; Yan, Hongyuan; Song, Yanxue.

A sensitive, economical, and miniaturized self-assembly pipet tip graphene solid-phase extraction (PT-G-SPE) coupled with liquid chromatog. fluorescence detection (LC-FD) was developed for rapid extraction and determination of three sulfonamide antibiotics (SAs) in environmental water samples. The PT-G-SPE cartridge, assembled by packing 1.0 mg of graphene as sorbent into a 100 μL pipet tip, showed high adsorption capacity for the SAs owing to the large surface area and unique structure of graphene. The factors that affected the extraction efficiency of PT-G-SPE, including sample volume, pH, sorbent amount, washing solvent and eluent solvent were optimized. Good linearity for SAs was obtained in a range of 2-4000 pg mL-1 with correlation coefficients (r2) ≥0.9993. The recoveries of the SAs at three spiked levels ranged from 90.4 to 108.2% with RSD ≤6.3%. In comparison with other sorbents such as C18, HLB, SCX, PCX, and multiwalled carbon nanotubes, one advantage of using graphene as sorbent of pipet tip solid-phase extraction (PT-SPE) was that PT-G-SPE could adsorb larger sample volume (10 mL) at a small amount of sorbent (1 mg) and low solvent consumption with good extraction efficiency, which not only increased the fraction of analytes to LC and the sensitivity of SAs determination, but also reduced the cost and pollution.

Compounds in my other articles are similar to this one(Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide)Synthetic Route of C10H8ClN4NaO2S, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

COA of Formula: C10H8ClN4NaO2S. Aromatic heterocyclic compounds can also be classified according to the number of heteroatoms contained in the heterocycle: single heteroatom, two heteroatoms, three heteroatoms and four heteroatoms. Compound: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide, is researched, Molecular C10H8ClN4NaO2S, CAS is 23307-72-4, about Anticoccidial power of sulfachlorpyrazine (Esb 3) against Eimeria acervulina. Author is Yvore, P.; Peloille, Michele; Jacquemot, Catherine.

Sulfachloropyrid-azine has the advantages of the greater efficiency and less toxicity compared with sulphaquinoxaline and sulphamethazine. With 300 mg./l. drinking water a significant anticoccidial activity in the chicken was observed and with 600 mg./l. for 5 days (administration during 3 days, no treatment during 4 days and retreatment for 2 days) no toxic effects were observed. Low doses seem to have coccidiocidal activity on 2nd schizogony. The new anticoccidial derivatives of hydroxyquinoline do not produce any immunity. Particularly E. tenella may develop again after the chemotherapy. It is possible that a complementary treatment by a sulfonamide in the drinking water during the days following the treatment may produce immunity. For this a coccidiocidal and not a coccidiostatic action should be achieved.

Compounds in my other articles are similar to this one(Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide)COA of Formula: C10H8ClN4NaO2S, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Hussien, Emad Mohamed; Saleh, Hanaa; El Henawee, Magda; Abou El Khair, Afaf; Ahmed, Neven published the article 《Voltammetric determination of sulfaclozine sodium at sephadex-modified carbon paste electrode》. Keywords: sulfaclozine sodium sephadex modified carbon paste electrode.They researched the compound: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide( cas:23307-72-4 ).Application In Synthesis of Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide. Aromatic heterocyclic compounds can be divided into two categories: single heterocyclic and fused heterocyclic. In addition, there is a lot of other information about this compound (cas:23307-72-4) here.

The electrochem. behavior of Sulfaclozine Sodium (SLC) was studied at a bare and sephadex-modified carbon paste electrodes by cyclic voltammetry and square wave voltammetry. The cyclic voltammetry (CV) showed a well-defined irreversible oxidation peak at 0.94 V in Britton-Robinson buffer pH 7.0. The strong affinity of SLC to sephadex allowed accumulation of SLC at the surface of electrode and thus higher electrochem. sensitivity to SLC. The influence of sephadex loading, the pH of the solution and the scan rate on the peak current was studied. A linear calibration curve covering the concentration range from 0.005 to 1 mM was obtained using SWV. The method was successfully applied for the determination of SLC in the veterinary pharmaceutical formulations with satisfactory accuracy and precision.

Compounds in my other articles are similar to this one(Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide)Application In Synthesis of Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide, you can compare them to see their pros and cons in some ways,such as convenient, effective and so on.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Formula: C10H8ClN4NaO2S. The mechanism of aromatic electrophilic substitution of aromatic heterocycles is consistent with that of benzene. Compound: Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide, is researched, Molecular C10H8ClN4NaO2S, CAS is 23307-72-4, about A self-assembly pipette tip graphene solid-phase extraction coupled with liquid chromatography for the determination of three sulfonamides in environmental water. Author is Sun, Ning; Han, Yehong; Yan, Hongyuan; Song, Yanxue.

A sensitive, economical, and miniaturized self-assembly pipet tip graphene solid-phase extraction (PT-G-SPE) coupled with liquid chromatog. fluorescence detection (LC-FD) was developed for rapid extraction and determination of three sulfonamide antibiotics (SAs) in environmental water samples. The PT-G-SPE cartridge, assembled by packing 1.0 mg of graphene as sorbent into a 100 μL pipet tip, showed high adsorption capacity for the SAs owing to the large surface area and unique structure of graphene. The factors that affected the extraction efficiency of PT-G-SPE, including sample volume, pH, sorbent amount, washing solvent and eluent solvent were optimized. Good linearity for SAs was obtained in a range of 2-4000 pg mL-1 with correlation coefficients (r2) ≥0.9993. The recoveries of the SAs at three spiked levels ranged from 90.4 to 108.2% with RSD ≤6.3%. In comparison with other sorbents such as C18, HLB, SCX, PCX, and multiwalled carbon nanotubes, one advantage of using graphene as sorbent of pipet tip solid-phase extraction (PT-SPE) was that PT-G-SPE could adsorb larger sample volume (10 mL) at a small amount of sorbent (1 mg) and low solvent consumption with good extraction efficiency, which not only increased the fraction of analytes to LC and the sensitivity of SAs determination, but also reduced the cost and pollution.

In some applications, this compound(23307-72-4)Formula: C10H8ClN4NaO2S is unique.If you want to know more details about this compound, you can contact with the author or consult more relevant literature.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In general, if the atoms that make up the ring contain heteroatoms, such rings become heterocycles, and organic compounds containing heterocycles are called heterocyclic compounds. An article called A self-assembly pipette tip graphene solid-phase extraction coupled with liquid chromatography for the determination of three sulfonamides in environmental water, published in 2014-01-31, which mentions a compound: 23307-72-4, Name is Sodium ((4-aminophenyl)sulfonyl)(6-chloropyrazin-2-yl)amide, Molecular C10H8ClN4NaO2S, Related Products of 23307-72-4.

A sensitive, economical, and miniaturized self-assembly pipet tip graphene solid-phase extraction (PT-G-SPE) coupled with liquid chromatog. fluorescence detection (LC-FD) was developed for rapid extraction and determination of three sulfonamide antibiotics (SAs) in environmental water samples. The PT-G-SPE cartridge, assembled by packing 1.0 mg of graphene as sorbent into a 100 μL pipet tip, showed high adsorption capacity for the SAs owing to the large surface area and unique structure of graphene. The factors that affected the extraction efficiency of PT-G-SPE, including sample volume, pH, sorbent amount, washing solvent and eluent solvent were optimized. Good linearity for SAs was obtained in a range of 2-4000 pg mL-1 with correlation coefficients (r2) ≥0.9993. The recoveries of the SAs at three spiked levels ranged from 90.4 to 108.2% with RSD ≤6.3%. In comparison with other sorbents such as C18, HLB, SCX, PCX, and multiwalled carbon nanotubes, one advantage of using graphene as sorbent of pipet tip solid-phase extraction (PT-SPE) was that PT-G-SPE could adsorb larger sample volume (10 mL) at a small amount of sorbent (1 mg) and low solvent consumption with good extraction efficiency, which not only increased the fraction of analytes to LC and the sensitivity of SAs determination, but also reduced the cost and pollution.

When you point to this article, it is believed that you are also very interested in this compound(23307-72-4)Related Products of 23307-72-4 and due to space limitations, I can only present the most important information.

Reference:
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com