Category: 17024-12-3

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 17024-12-3, name is 9-Iodophenanthrene belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below. Recommanded Product: 17024-12-3

Mixed under argon flow were 73 g of 4-bromodiphenylamine (A4), 135 g of 9-iodophenanthrene, 34 g of sodium t-butoxide (manufactured by Tokyo Kasei Kogyo Co., Ltd.), 4 g of bis(triphenylphosphine)palladium dichloride (manufactured by Tokyo Kasei Kogyo Co., Ltd.) and 1.5 liter of xylene, and they were reacted at 130C for 12 hours. Water was added to the reaction liquid, and the mixture was filtered through celite, followed by carrying out separation thereof with toluene. The oil layer was concentrated under reduced pressure to obtain crystal. This was refined through a column and then dissolved in toluene, and hexane was added thereto to reprecipitate crystal. It was filtered and then dried to obtain 82 g of N-(4-bromophenyl)-N-phenyl-9-aminophenanthrene (B3).

The synthetic route of 17024-12-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; IDEMITSU KOSAN CO., LTD.; EP1559706; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 17024-12-3, name is 9-Iodophenanthrene, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 17024-12-3, SDS of cas: 17024-12-3

A 500 mL three-necked round-bottomed flask equipped with a mechanical stirrer, reflux condenser, and inert gas in- and outlet was charged with quinidine (QD-1, 12.8g, 39.5 mmol, 1.2 eq). The flask was flushed for 30 min with a gentle stream of argon. Anhydrous dimethyl sulfoxide (130 mL, freshly distilled in presence of CaHz) was added, and the reaction mixture was stirred at room temperature until all the quinidine was dissolved. Sodium hydride (60% oil dispersion, 2.0g, 1.5 eq. ) was added in small portions yielding an orange, slightly cloudy solution of the corresponding sodium alkoxide. Upon addition of pyridine (6.4 mL, 2.4 eq. ) and copper (I) g, 1.2 eq. ) to the reaction mixture at room temperature, the color of the reaction mixture was changed from orange to dark green. After 30 min all of the precipitate dissolved, and a clear solution was formed. 9- iodophenanthrene (10.0 g, 32.9 mmol), was added, and the reaction mixture was kept at 113 C for 70 h (oil bath, temperature: 120 C). The reaction mixture was allowed to cool to room temperature. Water (100 mL), methylene chloride(100 mL), and diethyl ether (100 mL) were successively added to the brown solution followed by ethylenediaminetetraacetate disodium salt dehydrate (20 g) and concentrated aqueous ammonia solution (20 mL, 29%, w/w). The argon inlet was removed, and a gentle stream of air was flushed through the well-agitated reaction mixture for about 1 h. The reaction mixture was transferred to a separatory funnel and the turquoise blue aqueous phase separated from the dark brown organic phase. The aqueous layer was washed twice with methylene chloride (100 mL), and the combined organic phases were extracted three times with aqueous ammonia solution (200 mL, 5%, w/w) until the aqueous phase remained colorless. Then the organic layer was washed with HCl aq (1 N 2 x 50 mL) twice and washed with H20 three times (3 x 50 mL) to remove the left QD. The organic layer was washed with NH40H to neutralize the salt and dried over Na2S04 and the solvent was removed in vacuo to yield the crude product. The crude product was dissolved in ethyl ether (300 mL) and treated with HCI (IN in Et20) until no further precipitates was generated. The precipitates were collected and dissolved in CH2C12 and basified with NH40H and dried over Na2S04 and the solvent in vacuo to give yellowish foam QD-PHN (5.6g, 66% yield). [alpha]D23 = + 310.7(C 0.89 EtOH) (at)HNMR (CDC13, 400 Hz) 6 8.65-8.71 (m, 2H), 8.61 (d, J = 4.8 Hz, 1H), 8.52(d, J = 8 Hz, 1H), 8.07 (d, J= 9.2 Hz, 1H), 7.70-7.75 (m, 2H), 7.55 (d, 2.4 Hz, 1H), 7.38-7.46(m, 5H), 6.66 (s, 1H), 6.35 (br, 1H), 6.12-6.21 (m, 1H), 5.18(d, J=10.4 Hz, 1H), 5.12 (m, 1H), 4.03 (s, 3H), 3.32-3.42 (m, 2.97-3.06 (m, 2.79-2.87 (m, 1H),2.44-2.50(t, J= 10 Hz, 1H), 2.34-3.25 (m, 1H), 1.97 (br, 1H), 1.55-1.62 (m, 3H). ¹3CNMR:(CDCl3, 100Hz): 158.1, 150.4, 147.71, 144.7, 143.7, 140.3, 132.3, 132.2, 131.5, 127.5,127.3, 126.8, 126.7, 126.6,126.4, 124.5,122.8, 122.7,122.3, 121.8, 118.2, 114.7, 104.8, 100.8, 78.8, 60.5, 55.8, 50.2, 49.9, 39.6, 27.8, 26.5, 22.1. IR: 3062, 2935, 2863, 1622, 1594, 1507, 1454, 1226, 1117, 750.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; BRANDEIS UNIVERSITY; WO2005/121137; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 17024-12-3 as follows. HPLC of Formula: C14H9I

Mixed under argon flow were 100 g of 1-aminonaphthalene (manufactured by Aldrich Co., Ltd.), 255 g of 9-iodophenanthrene, 204 g of anhydrous potassium carbonate (manufactured by Tokyo Kasei Kogyo Co., Ltd.), 4.7 g of copper powder (manufactured by Hiroshima Wako Co., Ltd.) and 750 ml of decalin, and they were reacted at 190C for 3 days. After cooling, 2 liter of toluene was added thereto to filter an insoluble matter. The matter filtered was dissolved in 4.5 liter of chloroform to filter off an insoluble matter, and then the filtrate was treated with activated carbon and concentrated under reduced pressure. Acetone 3 litter was added when the solution became slurry in the middle of concentration, and crystal deposited was filtered and refined through a column. Mixed under argon flow were the powder obtained, 200 g of 4-bromoiodobenzene (manufactured by Tokyo Kasei Kogyo Co., Ltd.), 204 g of anhydrous potassium carbonate (manufactured by Tokyo Kasei Kogyo Co., Ltd.), 4.7 g of copper powder (manufactured by Hiroshima Wako Co., Ltd.) and 750 ml of decalin, and they were reacted at 190C for 3 days. After cooling, 2 liter of toluene was added thereto to filter an insoluble matter. The matter filtered was dissolved in 4.5 liter of chloroform to filter off an insoluble matter, and then the filtrate was treated with activated carbon and concentrated under reduced pressure. Acetone 3 litter was added when the solution became slurry in the middle of concentration, and crystal deposited was filtered. This was refined through a column and dissolved in toluene, and hexane was added thereto to reprecipitate crystal. It was filtered and then dried to obtain 64 g of N-(4-bromophenyl)-N-(phenantho-9-yl)-1-naphthylamine (B8).

According to the analysis of related databases, 17024-12-3, the application of this compound in the production field has become more and more popular.

Reference:
Patent; IDEMITSU KOSAN CO., LTD.; EP1559706; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 17024-12-3, name is 9-Iodophenanthrene, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 17024-12-3, SDS of cas: 17024-12-3

General procedure: Bis(triphenylphosphane)palladium(II)dichloride (14.2 mg,20.0 mmol, 2.00 mol%) and copper(I) iodide (7.62 mg, 40.0 mmol,4.00 mol%) were placed in a flame-dried 10 mL Schlenk tube with amagnetic stir bar under a nitrogen atmosphere and the Schlenktube was evacuated and flushed with nitrogen two more times.DME (3.0 mL) was added and the resulting yellow solution wasstirred for several minutes at rt. Aryl iodide 1 (1.00 mmol, 1.00equiv) and potassium carbonate (276 mg, 2.00 mmol, 2.00 equiv)were added and the vessel was closed and heated to 40 C. Ethylpropiolate (2) (198 mg, 2.00 mmol, 2.00 equiv) was dissolved inDME (0.95 mL) and added slowly over 21 h (1.0 mL syringe,0.50 mm/min feed rate). After complete addition, the syringe wasrinsed in the reaction mixture and stirring was continued for 1 h at40 C. Celite was added to the dark brown mixture and the solventwas removed under reduced pressure. For purification, chromatographyon silica gel was performed using manual flash techniqueor a Biotage SP4 flash purification system with eluents consisting ofn-hexane and EtOAc or acetone.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 9-Iodophenanthrene, and friends who are interested can also refer to it.

Reference:
Article; Goetzinger, Alissa C.; Michaelis, Carina S.; Mueller, Thomas J.J.; Dyes and Pigments; vol. 143; (2017); p. 308 – 316;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

17024-12-3, name is 9-Iodophenanthrene, belongs to iodides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. Recommanded Product: 17024-12-3

Synthesis of 1-[5-(1 ,1 ,3,3-tetramethylisoindolin-2-yloxylyl)-2-[9-(phenanthryl)]acetylene; 205 2079-lodophenanthrene (59 mg, 0.194 mmol), DABCO (62.5 mg, 0.557 mmol, 3 equiv) and Pd(OAc)2 (1 mg, 2.5 mol %) was dissolved in dry MeCN (1 cm3). 5-ethynyl- 1,1,3,3-tetramethylisoindolin-2-yloxyl 205 (50 mg, 0.233 mmol, 1.2 equiv) was added and mixture heated at 80 0C under argon for 4 h. Subsequently the solvent was removed under reduced pressure and the residue taken up in CHCI3 (~1 ml) ensuring the DABCO remained undissolved. Purification of the resulting solution by column chromatography (SiO2, eluant:10 % EtOAc, 90 % n-Hexane) gave 1 -[5-(1 , 1,3,3- tetramethylisoindolin-2-yloxylyl)-2-[9-(phenanthryl)]acetylene, 207 (68 mg, 0.175 mmol, 90 %).

The synthetic route of 17024-12-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; QUEENSLAND UNIVERSITY OF TECHNOLOGY; WO2007/124543; (2007); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 17024-12-3, name is 9-Iodophenanthrene, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 17024-12-3

General procedure: A 25 mM solution of iodobenzene (5a) and K2CO3 (2 equiv) in H2O/CH3CN (2:1) was pumped at a flow rate of 1.0 mL/min(contact time: 58 s) through a Phoenix flow reactor systemequipped with two cartridges of 4 (total 500 mg; 0.084 mmolPd). Flow hydroxycarbonylation with CO gas introduced from agas module (10 mL/min) was conducted at 100 C and a systempressure of 5 bar. The resulting solution was collected for 50min (50 mL) and the solvent was removed by evaporation. 2 Naq HCl (10 mL) was added and the resulting solid was collectedby filtration, washed with H2O (3 × 10 mL), and dried undervacuum to give benzoic acid (9a) as a white solid without anyfurther purification.Yield: 125 mg (82%); mp 122 C; 1H NMR(400 MHz, DMSO-d6): delta = 12.96 (br s, 1 H, COOH), 7.93 (d, J = 7.2Hz, 2 H, PhH-2 and PhH-6), 7.62 (t, J = 7.2 Hz, 1 H, PhH-4), 7.49 (t, J =7.2 Hz, 2 H, PhH-3 and PhH-5); 13C NMR (101 MHz, DMSO-d6): delta = 167.32 (COOH), 132.87 (Ph), 130.76 (Ph), 129.26 (Ph),128.57 (Ph); ESI-TOF-MS (neg.): m/z = 121 [M – H]-.

According to the analysis of related databases, 17024-12-3, the application of this compound in the production field has become more and more popular.

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 17024-12-3, name is 9-Iodophenanthrene, This compound has unique chemical properties. The synthetic route is as follows., Quality Control of 9-Iodophenanthrene

Mixed under argon flow were 50 g of 4-bromoaniline (manufactured by Tokyo Kasei Kogyo Co., Ltd.), 265 g of 9-iodophenanthrene, 84 g of sodium t-butoxide (manufactured by Tokyo Kasei Kogyo Co., Ltd.), 11 g of bis(triphenylphosphine)palladium dichloride (manufactured by Tokyo Kasei Kogyo Co., Ltd.) and 4.5 liter of xylene, and they were reacted at 130C for 12 hours. Water was added to the reaction liquid, and the mixture was filtered through celite, followed by carrying out separation thereof with toluene. The oil layer was concentrated under reduced pressure to obtain crystal. This was refined through a column and then dissolved in toluene, and hexane was added thereto to reprecipitate crystal. It was filtered and then dried to obtain 101 g of N,N-di(phenantho-9-yl)-4-bromoaniline (B6).

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 17024-12-3.

Reference:
Patent; IDEMITSU KOSAN CO., LTD.; EP1559706; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 17024-12-3, As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 17024-12-3 name is 9-Iodophenanthrene, This compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below.

General procedure: A mixture of a (hetero)aryl iodide 3 (2.00 mmol), PdCl2(PPh3)2 (28.1 mg, 0.04 mmol,2 mol %), and CuCl (7.92 mg, 0.08 mmol, 4 mol %) was dissolved in DMSO (2.00mL) in a 80 mL microwave vessel equipped with a stirring bar and a septum and was degassed with N2 for 5 min. After addition of trimethylsilylacetylene (0.42 mL,3.00 mmol) and dry triethylamine (0.55 mL, 4.00 mmol) the solution was stirred atroom temperature for 1 h.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 9-Iodophenanthrene, and friends who are interested can also refer to it.

Reference:
Article; Klukas, Fabian; Grunwald, Alexander; Menschel, Franziska; Mueller, Thomas J. J.; Beilstein Journal of Organic Chemistry; vol. 10; (2014); p. 672 – 679;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 17024-12-3, name is 9-Iodophenanthrene, molecular formula is C14H9I, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. HPLC of Formula: C14H9I

Mixed under argon flow were 100 g of N,N’-diacetyl-4,4′-benzidine (manufactured by Tokyo Kasei Kogyo Co., Ltd.), 337 g of 9-iodophenanthrene, 204 g of anhydrous potassium carbonate (manufactured by Tokyo Kasei Kogyo Co., Ltd.), 4.7 g of copper powder (manufactured by Hiroshima Wako Co., Ltd.) and 750 ml of decalin, and they were reacted at 190C for 3 days. After cooling, 2 liter of toluene was added thereto to filter an insoluble matter. The matter filtered was dissolved in 4.5 liter of chloroform to filter off an insoluble matter, and then the filtrate was treated with activated carbon and concentrated under reduced pressure. Acetone 3 litter was added when the solution became slurry in the middle of concentration, and crystal deposited was filtered and dried. This was suspended in a mixture of 2 liter of ethylene glycol and 20 ml of water, and 110 g of a 85 % potassium hydroxide aqueous solution was added thereto, followed by carrying out reaction at 120C for 12 hours. After left cooling down to a room temperature, the reaction liquid was injected to 4 liter of water and treated with activated carbon, and then it was concentrated under reduced pressure. Acetone was added when the solution became slurry, and crystal deposited was filtered and dried to obtain 116 g of N,N’-bis(phenantho-9-yl)-4,4′-benzidine (A3).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 17024-12-3, its application will become more common.

Reference:
Patent; IDEMITSU KOSAN CO., LTD.; EP1559706; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 17024-12-3, The chemical industry reduces the impact on the environment during synthesis 17024-12-3, name is 9-Iodophenanthrene, I believe this compound will play a more active role in future production and life.

10261] Into an 80-mE flask were put 3.27 g (17 mmol) of3-chlorobenzamidine hydrochloride, 5.2 g (17 mmol) of 9-io- dophenanthren, 0.31 g (1.6 mmol) of copper iodide, 16 g (49 mmol) of cesium carbonate, 0.29 g (3.3 mmol) of N,N-dimethylethylenediamine, and 80 mE of dimethylformamide (DMF), and the air in the flask was replaced with nitrogen. The mixture in the flask was stirred at 1000 C. for 21 hours. Then, 0.31 g (1.6 mmol) of copper iodide and 0.29 g (3.3 mmol) of N,N-dimethylethylenediamine were added, and the mixture was stirred at 110 C. for 8.5 hours. The resulting solution was subjected to suction filtration, and the obtained solid was washed with toluene. The obtained filtrate was washed with water, and the organic layer was washed with saturated saline. Magnesium sulfate was added to the organic layer for drying, and the resulting mixture was subjected to gravity filtration to give a filtrate. The filtrate was condensed to obtain an objective substance (a brown oily substance, at a yield of 50%). The synthesis scheme of Step 1 is shown in (a-i).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 9-Iodophenanthrene, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Semiconductor Energy Laboratory Co., Ltd.; HARA, Tomoka; INOUE, Hideko; TAKAHASHI, Tatsuyoshi; HAMADA, Takao; SEO, Satoshi; (60 pag.)US2016/190479; (2016); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com