Category: 14452-30-3

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 14452-30-3, name is 1-(3-Iodophenyl)ethanone, This compound has unique chemical properties. The synthetic route is as follows., Recommanded Product: 14452-30-3

To a stirred solution of l-(3-iodophenyl) ethanone 22-1 (200 mg, 0.81 mmol) in DMF (3 mL) was added allyl alcohol (252 mg, 4.06 mmol), AgOAc (137 mg,0.81 mmol), TPP (21 mg, 0.081 mmol). The mixture was purged with argon for 15 min and Pd(OAc)2 (27 mg, 0.04 mmol) was added at RT. The reaction mixture was warmed to 70 C for 16 hr under nitrogen atmosphere. The reaction mixture was diluted with water (10 mL) extracted with EtOAc (3 X 50 mL), the combined organic layers were washed with brine (2 X 40 mL) and dried over Na2S04 and concentrated. The residue was purified by column chromatography (100-200 silica) using 20-25% EtOAc/Pet. ether to afford 22-2 (100 mg, 0.56, 69.9% yield) as a colorless liquid. MS=177.1 [M+l]+.

Chemical properties determine the actual use. Each compound has specific chemical properties and uses. We look forward to more synthetic routes in the future to expand reaction routes of 14452-30-3.

Reference:
Patent; COCRYSTAL PHARMA, INC.; JACOBSON, Irina C.; FEESE, Michael D.; LEE, Sam S.; (169 pag.)WO2016/154241; (2016); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 14452-30-3, name is 1-(3-Iodophenyl)ethanone, A new synthetic method of this compound is introduced below., Safety of 1-(3-Iodophenyl)ethanone

General procedure: In a typical experiment, a predetermined amount of Ni-MOF-74 was added to the 8 mL vial containing a mixture of iodobenzene (0.1030 g, 0.5 mmol), benzothiazole (0.1379 g, 1.0 mmol), Li2CO3 or KCl (1.0 mmol), and diphenyl ether (0.085 g, 0.5 mmol) as standard. 1-Methoxy-2-(2-methoxyethoxy)ethane (diglyme) (1 mL) was added and vial was tightly capped. Reaction mixture was heated at 160C for 24 h. The catalyst loading was based on the molar ratio of nickel/iodobenzene. The reaction yield was monitored by withdrawing aliquots from the reaction mixture at different time intervals, diluting with ethylacetate (2 mL), quenching with an aqueous KOH solution (1%, 1 mL), and then drying over anhydrous Na2SO4 before analyzing by GC with reference to diphenyl ether (internal equation with pure product), and further confirming product identity by GC-MS and NMR. To investigatethe recycle ability of Ni-MOF-74, the catalyst was filtered from the reaction mixture after the experiment, washed with ethylacetate, water, THF, and dried at 140C under vacuum in 8 h. For the leaching test, a catalytic reaction was stopped after 12 h, analyzed by GC, and filtered to remove the solid catalyst. The reaction solution was then stirred for a further 12 h. Reaction progress, if any, was monitored by GC as previously described.

The synthetic route of 14452-30-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Nguyen, Huong T.T.; Doan, Duc N.A.; Truong, Thanh; Journal of Molecular Catalysis A: Chemical; vol. 426; (2017); p. 141 – 149;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 14452-30-3 as follows. Recommanded Product: 14452-30-3

General procedure: A mixture of NH4Cl (0.14 g, 2.5 mmol), 1-(pyridin-2-yl)ethan-1-one (0.6 g, 5.0 mmol), and 20.0 mL of acetonitrile wasstirred for 5 minutes, then DCDMH (1.95 g, 10 mmol) was added, the mixture was stirred for 16 hours at 40 oC. Aftercompletion of the reaction, solvent was removed and ethyl acetate (20 mL) was added. Then the ethyl acetate was washedtwice with water (20 mL), the organic phase was dried over anhydrous sodium sulfate and subsequently the solvent wasevaporated under reduced pressure. The residues were purified by silica gel column chromatography to give 10 as yellowoil. Yield: 78.7 %.

According to the analysis of related databases, 14452-30-3, the application of this compound in the production field has become more and more popular.

Reference:
Article; Zhang, Shao-Lin; Yang, Zheng; Hu, Xiaohui; Tam, Kin Yip; Bioorganic and Medicinal Chemistry Letters; vol. 28; 21; (2018); p. 3441 – 3445;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Application of 14452-30-3, A common heterocyclic compound, 14452-30-3, name is 1-(3-Iodophenyl)ethanone, molecular formula is C8H7IO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of CuI (Sigma-Aldrich, 0.025 mmol, 5 mol%), anhydrousK3PO4 (0.65 mmol), 2-mercaptobenzimidazole (0.5mmol), DMSO (0.2 mL), and aryl halide (0.75 mmol) were addedto a reaction vial and a screw cap was fitted to it. The reactionmixture was stirred under air in a closed system at 100 C for24 h. The heterogeneous mixture was subsequently cooled toroom temperature and diluted with dichloromethane. The combinedorganic extracts were dried with anhydrous Na2SO4, andthe solvent was removed under reduced pressure. The crudeproduct was loaded into the column using minimal amounts ofdichloromethane and was purified by silica gel column chromatographyto afford the S-arylated product. The identity andpurity of products was confirmed by 1H NMR and 13C NMRspectroscopic analysis

The synthetic route of 14452-30-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Tan, Bryan Yong-Hao; Teo, Yong-Chua; Synlett; vol. 29; 15; (2018); p. 2056 – 2060;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 14452-30-3, A common heterocyclic compound, 14452-30-3, name is 1-(3-Iodophenyl)ethanone, molecular formula is C8H7IO, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of Cu2O (Sigma-Aldrich, 99.99% purity, 0.147 mmol), Cs2CO3 (2.94 mmol),distilled water (0.2 mL), aryl halide (1.47 mmol) and p-toluenesulfonic acid (TsOH) solution(0.3 mL, 2.45 mol/dm3) were added to a reaction vial and a screw cap was fitted to it. Thereaction mixture was stirred under air in a closed system at 120 C for 24 h, following whichthe heterogeneous mixture was cooled to room temperature and diluted with dichloromethane.The combined organic extracts were dried with anhydrous Na2SO4 and the solvent wasremoved under reduced pressure. The crude product loaded into the column using minimalamounts of dichloromethane and was purified by silica-gel column chromatography to affordthe N-arylated product. The identity and purity of products was confirmed by 1H and 13CNMR spectroscopic analysis.

The synthetic route of 14452-30-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Tan, Bryan Yong-Hao; Teo, Yong-Chua; Synlett; vol. 27; 12; (2016); p. 1814 – 1819;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 14452-30-3, name is 1-(3-Iodophenyl)ethanone, A new synthetic method of this compound is introduced below., Computed Properties of C8H7IO

General procedure: To a test tube containing a magnetic bar was added aryl halide (1.0 mmol), CuCl2 (13.4 mg, 0.1 mmol), KOH (336 mg, 6.0 mmol), ethylene glycol(12 muL, 0.2 mmol), and DMSO/H2O (1.0 mL/0.5 mL). After flushing with argon, the mixture was stirred in a preheated oil bath at 120 C for 24 h. After cooled to ambient temperature, the reaction mixture was distributed in aqueous HCl (5 %) and ethyl acetate. The organic layer was washed with water and brine, dried over anhydrous MgSO4, and concentrated under vacuum. The crude product was further purified by column chromatography (EtOAc/n-Hexane) to provide the phenols.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Kim, Jihye; Battsengel, Oyunsaikhan; Liu, Yajun; Chae, Junghyun; Bulletin of the Korean Chemical Society; vol. 36; 12; (2015); p. 2833 – 2840;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 14452-30-3,Some common heterocyclic compound, 14452-30-3, name is 1-(3-Iodophenyl)ethanone, molecular formula is C8H7IO, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: Aryl halide (1a,b18a,b, 1.1 equiv, typically ca. 50 mg), NN-AuSIMes (1.0equiv) and a Pd catalyst [Pd(PPh3)4 (10 mol% in most cases), orPd2(dba)3¡éCHCl3 (5 mol% in most cases)] were dissolved ina dry solvent (typically THF) under nitrogen. The mixture washeated at THF reflux temperature (66 C) until the starting Aucomplexwas consumed (monitored by TLC, usually 3h forArI but longer time for ArBr). After the reaction mixture wasconcentrated under reduced pressure, toluene (ca. 3 mL) wasadded to the residue. The filtrate was concentrated. The residuewas separated and purified by chromatography, to afford thecross-coupling product.

The synthetic route of 14452-30-3 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Yamada, Kiyomi; Zhang, Xun; Tanimoto, Ryu; Suzuki, Shuichi; Kozaki, Masatoshi; Tanaka, Rika; Okada, Keiji; Bulletin of the Chemical Society of Japan; vol. 91; 7; (2018); p. 1150 – 1157;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com