Category: 13194-69-9

Reference of 13194-69-9, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 13194-69-9, name is 2-Iodo-5-methylaniline belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: To a 10mL sealed tube was added CuI (0.05mmol), L4 (0.1mmol), ortho-iodo/bromoaniline (0.5mmol), beta-keto ester/beta-diketone (3.0mmol), Cs2CO3 (1.0mmol), and DMSO (1mL). The reaction mixture was reacted at 80C in a preheated oil bath for 12h (for ortho-iodoanilines) or 36h (for ortho-bromoanilines). The reaction mixture was cooled to room temperature and extracted with ethyl acetate (3×20mL). The combined organic phases were washed with water and brine, dried over anhydrous Na2SO4, and concentrated in vacuo. The residue was purified by flash column chromatograph on silica gel (ethyl acetate/petroleum ether as the eluent) to afford the target products 3a-3s.

The synthetic route of 2-Iodo-5-methylaniline has been constantly updated, and we look forward to future research findings.

Reference:
Article; Liu, Xiao-Guang; Li, Zi-Hao; Xie, Jian-Wei; Liu, Ping; Zhang, Jie; Dai, Bin; Tetrahedron; vol. 72; 5; (2016); p. 653 – 657;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Application of 13194-69-9,Some common heterocyclic compound, 13194-69-9, name is 2-Iodo-5-methylaniline, molecular formula is C7H8IN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

The corresponding imidazopyridine (0.2 mmol) was added sequentially to a 25 ml Schlenk tube filled with oxygen and equipped with a magnetic stirrer at room temperature.Cuprous iodide (0.04 mmol), 2-iodo-5-methylaniline (0.3 mmol), 1,10-azaphenanthroline (0.04 mmol), sodium carbonate (0.6 mmol), and carbon disulfide were added by syringe under oxygen conditions ( 0.6 mmol), DMF (2.0 mL), and the reaction tube was stirred in a 120 C oil bath for 9 hours. The obtained solution was cooled to room temperature, 2 mL of deionized water was added to the reaction liquid, and the mixture was uniformly mixed. Each time, 3 mL of ethyl acetate was used as an extracting agent, and the crude product was extracted from the reaction liquid by a liquid separation extraction operation, and the extract was combined. The solvent was removed by a rotary evaporator; the residue was purified on a silica gel column (yield: 200 mesh to 300 mesh, eluted with petroleum ether/ethyl acetate (7:1 v/v)) to give the desired product 55.2 mg. The yield was 74%.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Iodo-5-methylaniline, its application will become more common.

Reference:
Patent; Qingdao University of Science and Technology; Yang Daoshan; Yan Qiuli; (17 pag.)CN110294757; (2019); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 13194-69-9,Some common heterocyclic compound, 13194-69-9, name is 2-Iodo-5-methylaniline, molecular formula is C7H8IN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A mixture of o-iodoaniline (0.5 mmol, 1 equiv), arylacetic acid (0.6 mmol), elemental sulfur (1.5mmol), Cu(OAc)2·H2O (20 mmol%), and NaOH (1.0 mmol) in DMSO (3 mL) was put into a sealed pressure vessel (25 mL) containing a magnetic stirring bar. The tube was purged with nitrogen three times, and then capped and stirred in a preheated oil bath at 130 C for 24 h. The reaction mixture then cooled to room temperature and extracted with ethyl acetate (3×10 mL), the organic layer was washed with saturated NaCl (2×10 mL), dried over anhydrous Na2SO4, evaporated under vacumm and then purified by silica gel column chromatography by using petroleum ether and ethyl acetate (PE:EA=200:1) as eluent.

The synthetic route of 13194-69-9 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Wang, Xin; Li, Xiaotong; Hu, Renhe; Yang, Zhao; Gu, Ren; Ding, Sai; Li, Pengyi; Han, Shiqing; Synlett; vol. 29; 2; (2018); p. 219 – 224;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 13194-69-9, name is 2-Iodo-5-methylaniline, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13194-69-9, Formula: C7H8IN

General procedure: The corresponding pyrazinoic acid (5.0 mmol) was dispersed in dry toluene (20 mL) and mixed with 1.5eq. of thionyl chloride (0.55 mL, 7.5 mmol). The reaction mixture was heated to reflux for approximately 1 h. Next, the excess of thionyl chloride was removed by repeated evaporation with dry toluene under vacuum.The crude acyl chloride was dissolved in dry acetone(20 mL) and added drop-wise to a stirred solution of the corresponding aniline (5.0 mmol) with triethylamine(5.0 mmol) in dry acetone (30 mL). The reaction mixture was stirred at ambient temperature for up to 6 h. The completion of the reaction was monitored by TLC (eluent: hexane/ethyl acetate; r =2 : 1). The crude product adsorbed on silica gel by solvent evaporation was purified by flash chromatography(hexane/ethyl acetate gradient elution).The analytical data of the prepared compounds were fully consistent with the proposed structures and are available in the Supplementary Data.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Article; Zitko, Jan; Barbora, Servusova-Vanaskova; Paterova, Pavla; Navratilova, Lucie; Trejtnar, Frantisek; Kunes, Jiri; Dolezal, Martin; Chemical Papers; vol. 70; 5; (2016); p. 649 – 657;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 13194-69-9, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 13194-69-9, name is 2-Iodo-5-methylaniline, This compound has unique chemical properties. The synthetic route is as follows.

General procedure: The corresponding pyrazinoic acid (5.0 mmol) was dispersed in dry toluene (20 mL) and mixed with 1.5eq. of thionyl chloride (0.55 mL, 7.5 mmol). The reaction mixture was heated to reflux for approximately 1 h. Next, the excess of thionyl chloride was removed by repeated evaporation with dry toluene under vacuum.The crude acyl chloride was dissolved in dry acetone(20 mL) and added drop-wise to a stirred solution of the corresponding aniline (5.0 mmol) with triethylamine(5.0 mmol) in dry acetone (30 mL). The reaction mixture was stirred at ambient temperature for up to 6 h. The completion of the reaction was monitored by TLC (eluent: hexane/ethyl acetate; r =2 : 1). The crude product adsorbed on silica gel by solvent evaporation was purified by flash chromatography(hexane/ethyl acetate gradient elution).The analytical data of the prepared compounds were fully consistent with the proposed structures and are available in the Supplementary Data.

The chemical industry reduces the impact on the environment during synthesis 2-Iodo-5-methylaniline. I believe this compound will play a more active role in future production and life.

Reference:
Article; Zitko, Jan; Barbora, Servusova-Vanaskova; Paterova, Pavla; Navratilova, Lucie; Trejtnar, Frantisek; Kunes, Jiri; Dolezal, Martin; Chemical Papers; vol. 70; 5; (2016); p. 649 – 657;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 13194-69-9, name is 2-Iodo-5-methylaniline, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 13194-69-9, Recommanded Product: 2-Iodo-5-methylaniline

The corresponding imidazopyridine compound (0.2 mmol) and cuprous iodide (0.02 mmol) were sequentially added to a 25 ml Schlenk tube filled with oxygen and equipped with a magnetic stirrer at room temperature.2-iodo-5-methylaniline (0.5 mmol),1,10-azaphenanthrene (0.06 mmol), DBU (0.8 mmol),Carbon disulfide (0.4 mmol) and toluene (2.0 mL) were added by syringe under oxygen.The reaction tube was placed in a 120 C oil bath and stirred for 7 hours. The resulting solution was cooled to room temperature, and 2 mL of deionized water was added to the reaction mixture, and the mixture was uniformly mixed.Each time, 3 mL of ethyl acetate was used as an extractant to perform a liquid separation extraction operation.The crude product is extracted from the reaction liquid, and the extract is combined, and the solvent is removed by a rotary evaporator; the residue is purified by a silica gel column (silica gel size: 200 mesh to 300 mesh,The eluent is petroleum ether/ethyl acetate (6:1 v/v)).The target product was obtained in 64.5 mg, yield 80%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound, 2-Iodo-5-methylaniline, and friends who are interested can also refer to it.

Reference:
Patent; Qingdao University of Science and Technology; Yang Daoshan; Yan Qiuli; (17 pag.)CN110294757; (2019); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Reference of 13194-69-9,Some common heterocyclic compound, 13194-69-9, name is 2-Iodo-5-methylaniline, molecular formula is C7H8IN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

1-2 (0.0103 mol) was added drop wise to a mixture of 1-1 (0.0051 mol), Pd (PPh3) 2C12 (0.0005 mol) and GuI (0.0005 mol) in Et3N (15 ml) under N2 flow. The mixture was stirred at room temperature for 4 hours, poured into H20 and extracted with EtOAc. The organic layer was washed with H20, dried (over MgSO4), filtered and the solvent was evaporated_ The residue (2.1 g) was purified by column chromatography over silica gel (eluent: CHxClz/cyclohexane 70/30). The pure fractions were collected and the solvent was evaporated Yield: 1 g of intermediate 1-3 (79%).

The synthetic route of 13194-69-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; TIBOTEC PHARMACEUTICALS LTD.; WO2005/58871; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 13194-69-9, name is 2-Iodo-5-methylaniline, A new synthetic method of this compound is introduced below., Product Details of 13194-69-9

General procedure: The corresponding pyrazinoic acid (5.0 mmol) was dispersed in dry toluene (20 mL) and mixed with 1.5eq. of thionyl chloride (0.55 mL, 7.5 mmol). The reaction mixture was heated to reflux for approximately 1 h. Next, the excess of thionyl chloride was removed by repeated evaporation with dry toluene under vacuum.The crude acyl chloride was dissolved in dry acetone(20 mL) and added drop-wise to a stirred solution of the corresponding aniline (5.0 mmol) with triethylamine(5.0 mmol) in dry acetone (30 mL). The reaction mixture was stirred at ambient temperature for up to 6 h. The completion of the reaction was monitored by TLC (eluent: hexane/ethyl acetate; r =2 : 1). The crude product adsorbed on silica gel by solvent evaporation was purified by flash chromatography(hexane/ethyl acetate gradient elution).The analytical data of the prepared compounds were fully consistent with the proposed structures and are available in the Supplementary Data.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Related Products of 13194-69-9, The chemical industry reduces the impact on the environment during synthesis 13194-69-9, name is 2-Iodo-5-methylaniline, I believe this compound will play a more active role in future production and life.

General procedure: 2-Iodoaniline 2a (65.7 mg, 0.3 mmol), Cu(OAc)2 (6 mg, 10%), KOtBu (101 mg, 0.9 mmol), DMAc (1.0 mL) were mixed in a Schlenck tube and then to the mixture was added 2-(phenylethynyl)benzonitrile1a (74 mg, 0.36 mmol) under N2. The reaction mixture was stirred for 12 h at 120 C under N2. After the reaction was completed (monitored by TLC), the reaction mixture was then diluted with water and extracted with ethyl acetate. After the combined organic layers were washed with brine, dried over Na2SO4, and concentrated under reduced pressure, the residue was purified by flash column chromatography on silica gel using petroleum ether/ethyl acetate as eluent to afford the pure product 3

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Iodo-5-methylaniline, other downstream synthetic routes, hurry up and to see.

Reference of 13194-69-9,Some common heterocyclic compound, 13194-69-9, name is 2-Iodo-5-methylaniline, molecular formula is C7H8IN, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: A 25mL oven-dried Schlenk tube were added 2-iodoaniline 1a (110mg, 0.5mmol), phenylacetic acid 2a (81.7mg, 0.6mmol) or benzyl chloride 4a (75.9mg, 0.6mmol), selenium powder (118mg, 1.5mmol), CuBr (7.17mg, 10mmol%), KOH (56.1mg, 1.0mmol) or Cs2CO3 (326mg, 1.0mmol), DMSO (1.5mL). The tube was purged with nitrogen three times. Then the reaction mixture was stirred in a preheated oil bath at 120C for 18h. After the reaction was completed, the mixture was diluted with a saturated solution of Na2CO3 (15mL) and extracted with ethyl acetate (3×10mL). The organic layer was dried over anhydrous Na2SO4, then concentrated in vacuo. The residue was purified by silica gel column chromatography (petroleum ether/ethyl acetate, 100/1) to give pure product 3aa.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 2-Iodo-5-methylaniline, its application will become more common.