Category: 124700-41-0

Synthetic Route of 124700-41-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 124700-41-0, name is 2-Fluoro-5-iodobenzoic acid belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

Intermediate 11Z)-Ethyl 3-(dimethylamino)-2-(2-fluoro-5-iodobenzoyl)acrylate2-Fluoro-5-iodobenzoic acid (5.20 g, 19.55 mmol, Aldrich) was suspended in thionyl chloride (1.427 mL, 19.55 mmol, Aldrich) and heated to reflux for 30 min. The reaction mixture was cooled to room temperature and concentrated under reduced pressure to a tan solid. The solid was dissolved in toluene (30 mL) and concentrated under reduced pressure again. To a solution of the resulting solid (5.20 g, 19.55 mmol) in toluene (30 mL) was added triethylamine (2.72 mL, 19.55 mmol, Acros) and (Z)-ethyl 3-(dimethylamino)acrylate (3.64 mL, 25.41 mmol, Acros) and the reaction mixture was heated to 90 C. for 1 h. The reaction mixture was diluted with water and extracted three times with ethyl acetate. The combined organic extracts were dried over magnesium sulfate, filtered and concentrated under reduced pressure. Purification by Isco column (0%-100% ethyl acetate/dichloromethane) afforded the desired compound as a yellow solid (6.51 g).MS (ES) (M+H)+: 392 for C14H15FINO3 1H NMR: 0.88 (t, 3H), 2.78 (s, 3H), 3.33 (s, 3H), 3.85 (q, 2H), 7.03 (dd, 1H), 7.65 (dd, 1H), 7.77 (s, 2H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 2-Fluoro-5-iodobenzoic acid, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; ASTRAZENECA AB; US2010/317624; (2010); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 124700-41-0, name is 2-Fluoro-5-iodobenzoic acid, molecular formula is C7H4FIO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Application In Synthesis of 2-Fluoro-5-iodobenzoic acid

A stirred suspension of 2-fluoro-5-iodobenzoic acid (99.7 g) in DCM (1 L) at 200C was treated with oxalyl chloride (49.8 mL) and DMF (0.3 mL). After 3 h further DMF (0.1 mL) was added. After a further 2 h the clear solution was evaporated and re-evaporated from toluene (3 x 200 mL). The acid chloride was re-dissolved in toluene (1.5 L) and treated with triethylamine (79.2 mL) and ethyl 3-(dimethylamino)acrylate (65.3 g). After stirring for 2.5 h at 900C the mixture was filtered and evaporated. The residue was redissolved in EtOAc, washed with saturated sodium hydrogen carbonate solution (2x), water, saturated brine, dried (MgSO4) and treated with decolourising charcoal for 0.5 h. The mixture was filtered, evaporated, redissolved in diethyl ether and allowed to crystallise. The solid was filtered off, washed with diethyl ether and dried to give the title compound (91.2 g). On concentration and seeding a second crop was obtained (9.0 g); ESMS m/z 391.9 [M+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 124700-41-0, its application will become more common.

Reference:
Patent; GLAXO GROUP LIMITED; WO2007/54295; (2007); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

124700-41-0, The chemical industry reduces the impact on the environment during synthesis 124700-41-0, name is 2-Fluoro-5-iodobenzoic acid, I believe this compound will play a more active role in future production and life.

Add bis (triphenylphosphine) palladium (II) dichloride (70 mg, 0. 10 mmol), copper (I) iodide (38 mg, 0. 20 mmol), and 3-ethynyl-5-methoxypyridine, (prepared as described in PREPARATION 10), (400 mg, 3. 0 mmol) to a solution of 2-fluoro-5-iodobenzoic acid (0. 53 g, 2. 0 mmol) in triethylamine (4. 2 mL, 30. 0 mmol) and stir at room temperature for 1 h. Heat at 50 C for 18 h. Cool to room temperature and concentrate. Purify by silica gel chromatography, eluting with 100 : 0 to 60 : 40 ethyl acetate : methanol. Triturate the resulting solid with 3 : 1 hexanes : methanol to give the title compound as an off-white solid (295 mg, 54%). 1H NMR (300 MHz, DMSO-d6) 6 3. 86 (s, 3H), 7. 09-7. 17 (m, 1H), 7. 46-7. 53 (m, 1H), 7. 55-7. 59 (m, 1H), 7. 81-7. 87 (m, 1H), 8. 24-8. 35 (m, 2H) ; MS (APCI) : m/z = 272 [M+H] +.

The chemical industry reduces the impact on the environment during synthesis 2-Fluoro-5-iodobenzoic acid. I believe this compound will play a more active role in future production and life.

Reference:
Patent; ELI LILLY AND COMPANY; WO2005/94822; (2005); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 124700-41-0, name is 2-Fluoro-5-iodobenzoic acid, This compound has unique chemical properties. The synthetic route is as follows., 124700-41-0

Preparation 2 PNU-244020 Ethyl 3-(2-fluoro-5-iodophenyl)-3-oxopropanoate To a solution of 2-fluoro-5-iodobenzoic acid (4.03 g, 15.14 mmol) in 11 mL freshly distilled THF is added CDl (2.96 g, 18.24 mmol) in small portions. Vigorous gas evolution is observed. The reaction is stirred overnight. In a separate flask, ethyl malonate potassium salt (2.84 g, 16.69 mmol) is suspended in 10 mL CH3CN. To this solution is added chlorotrimethylsilane (2.15 mL, 16.94 mmol) and the reaction is stirred at room temperature overnight. The latter reaction is cooled to 0 C. and DBU (5.00 mL, 33.43 mmol) is added dropwise. This reaction is stirred at 0 C. for 3 h. The solution of the CDI adduct is then cannulated over and the mixture is stirred at 0 C. for 2 h. Upon complete conversion to product as evidenced by TLC, the solution is quenched with water and 6N HCl (8 mL). The reaction is partitioned with diethyl ether. The organic layer is washed with 1N HCl and then brine, dried over Na2SO4, filtered, and concentrated to give a light orange oil. The oil is dissolved in EtOAc and adsorbed onto silica. Purification by chromatography (eluent 3% EtOAc/hexanes) affords the desired product as a colorless oil which crystallized upon standing (2.51 g, 7.46 mmol, 49%). Physical characteristics are as follows: m.p. 54-56 C.; 1H NMR (300 MHz, CDCl3) delta 12.67, 8.18, 7.70, 6.89, 5.54, 4.28, 1.35; IR (drift) 2984, 1627, 1558, 1476, 1422, 1390, 1358, 1292, 1262, 1221, 1201, 1071, 1028, 823, 807 cm -1; MS (EI) m/z 336 (M+), 336, 249, 122, 107, 94, 86, 84, 69, 68, 51; Anal. Calcd for C11H10FIO3: C, 39.31; H, 3.00; Found: C, 39.35; H, 2.92.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Vaillancourt, Valerie A.; Larsen, Scott D.; Nair, Sajiv K.; US2002/42397; (2002); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 124700-41-0, name is 2-Fluoro-5-iodobenzoic acid, molecular formula is C7H4FIO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. 124700-41-0

A stirred suspension of 2-fluoro-5-iodobenzoic acid (99.7 g) in DCM (1 L) at 20 C. was treated with oxalyl chloride (49.8 mL) and DMF (0.3 mL). After 3 h further DMF (0.1 mL) was added. After a further 2 h the clear solution was evaporated and re-evaporated from toluene (3¡Á200 mL). The acid chloride was re-dissolved in toluene (1.5 L) and treated with triethylamine (79.2 mL) and ethyl 3-(dimethylamino)acrylate (65.3 g). After stirring for 2.5 h at 90 C. the mixture was filtered and evaporated. The residue was redissolved in EtOAc, washed with saturated sodium hydrogen carbonate solution (2¡Á), water, saturated brine, dried (MgSO4) and treated with decolourising charcoal for 0.5 h. The mixture was filtered, evaporated, redissolved in diethyl ether and allowed to crystallise. The solid was filtered off, washed with diethyl ether and dried to give the title compound (91.2 g). On concentration and seeding a second crop was obtained (9.0 g); ESMS m/z 391.9 [M+H]+.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 124700-41-0, its application will become more common.

Reference:
Patent; Glaxo Group Limited; US2008/269146; (2008); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

124700-41-0, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 124700-41-0, name is 2-Fluoro-5-iodobenzoic acid belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

PREPARATION 8 Ethyl 3-(2-fluoro-5-iodophenyl)-3-oxopropanoate To a stirred solution of 5.32 g of 2-fluoro-5-iodobenzoic acid from Preparation No. 7 in 20 mL of THF, under argon, is added 3.9 g of carbonyldiimidazole. In a separate flask, 2.8 mL of chlorotrimethylsilane is added to a mixture of 3.74 g of potassium ethyl malonate in 20 mL of acetonitrile. The mixture is stirred under argon for 18 h, then cooled to 0 C. for the dropwise addition of 6.6 mL of DBU. The mixture is stirred for 3 h at 0 C., then the solution of acyl imidazolide prepared above is added via cannula. After 2 hours, the mixture is partitioned between ether and excess dilute HCl, and the organic phase is washed with dilute HCl and brine and dried (MgSO4). Removal of the solvent under reduced pressure left a colorless oil, which is flash chromatographed on silica using 10% ethyl acetate in hexane to provide 5.07 g of the title compound as dense pinkish prisms. Physical properties as follows: 1H NMR (CDCl3) delta 1.34, 4.27, 5.82, 6.89, 7.7, 8.2 ppm; IR 1624, 1485, 1419, 1245, 1193, 1070, 1028, 813 cm-1.

The synthetic route of 124700-41-0 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Pharmacia & Upjohn Company; US6248736; (2001); B1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com