Category: 103440-52-4

Reference of 103440-52-4, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, This compound has unique chemical properties. The synthetic route is as follows.

To a solution of methyl 2-iodo-5-methylbenzoate in 2-MeTHF (25 mL) triethylamine (3.0 mL, 21.7 mol) was added and the solution was degassed with N2. Pinacol borane (1.56 mL, 10.8 mol) was added slowly (over 15 minutes) to the stirring solution while maintaining the purge. The solution was further degassed for 10 minutes and Tri-o- tolylphosphine (110 mg, 0.36 mol) was added followed by Palladium (II) acetate (50 mg, 0.22mol). This caused the reaction to turn black immediately with a slow exothermic from 1 1 C to 25 C. At this point a delayed exothermic was observed and the reaction temperature increased to 60 C (over 45 minutes). The reaction temperature was increased to 77 C and aged for 2 hours. The heat source was removed and the reaction was cooled for 1 hour. A 26 w/w% ammonium chloride solution was added very slowly to control gas evolution and exothermic which caused a black precipitated to form. The supernatant was transferred to the extractor which already contained 43 mL of water. The remaining black slurry was filtered and washed with diethyl ether. The solution was transferred to a separatory funnel and the layers were separated The crude was purified by FC on silica gel (eluent: Cy/EtoAc 8/2) affording methyl 5-methyl-2-(tetramethyl-1 ,3,2- dioxaborolan-2-yl)benzoate (p59, 1 .51 g, y=76%). MS (mlz): 276.0 [M]+.

The chemical industry reduces the impact on the environment during synthesis Methyl 2-Iodo-5-methylbenzoate. I believe this compound will play a more active role in future production and life.

Reference:
Patent; CHRONOS THERAPEUTICS LIMITED; MICHELI, Fabrizio; BERTANI, Barbara; GIBSON, Karl Richard; DI FABIO, Romano; RAVEGLIA, Luca; ZANALETTI, Riccardo; CREMONESI, Susanna; POZZAN, Alfonso; SEMERARO, Teresa; TARSI, Luca; LUKER, Timothy Jon; (275 pag.)WO2019/43407; (2019); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 103440-52-4, The chemical industry reduces the impact on the environment during synthesis 103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, I believe this compound will play a more active role in future production and life.

Step B: Pd(PPh3)4 (523 mg, 0.45 mmol) was added to a rt solution of methyl 2-iodo-5- methylbenzoate in toluene (23 mL). After the solution was stirred for 10 min, a solution of phenylboronic acid (1 .24 g, 9.96 mmol) in EtOH (10 mL) was added, followed by 2M aq. Na2C03 (21 mL). The mixture was vigorously stirred and heated to reflux for 24h. The rxn mixture was allowed to reach rt, then Et20 was added and the org. layer was separated and concentrated in vacuo. Purification by FC (Biotage SP1 : EtOAc/hept eluting with a gradient of 0-10% EtOAc) was performed to give methyl 4-methyl-[1 , 1 ‘-biphenyl]-2-carboxylate as a colorless oil. LC-MS A: tR = 0.94 min; [M+H]+ = 227.16.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, Methyl 2-Iodo-5-methylbenzoate, other downstream synthetic routes, hurry up and to see.

Adding a certain compound to certain chemical reactions, such as: 103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 103440-52-4, name: Methyl 2-Iodo-5-methylbenzoate

General procedure: This kind of general experimental procedure is based on our already published procedure.13 The general procedure (GP) was carried out with ortho-iodoester 1a-d (105.0-136.0 mg, 0.40 mmol) and aldehyde 2a-k (195.0-313.0 mg, 1.6 mmol) in the presence of Pd(OAc)2 (5.0 mg, 5 mol%), Ag2O (111.3 mg, 0.48 mmol), and TBHP (257.1 mg, 2.0 mmol) allowing the reaction mixture to stir at 120 C for 12-20 h. Progress of the reaction was monitored by TLC until the ortho-iodoester 1a-d had completely reacted. Then the reaction mixture was removed from the oil bath and allowed to reach r.t. DCE (2 mL) and concd H2SO4 (1.0 mL) were added and the mixture was stirred at 60 C for 5 min to 2 h. Progress of the product formation was monitored by TLC until the reaction was complete. The mixture was quenched by the addition of aq NaHCO3 and then extracted with CH2Cl2 (3 * 15 mL). The combined organic layers were washed with brine, dried (Na2SO4), and filtered. Evaporation of the solvent under reduced pressure and purification of the crude material by silica gel column chromatography (PE/EtOAc) furnished the products 3 (57.0-86.0 mg, 55-69%). The products 3aa, 3ac, 3ai, 3aj, 3ak, 3ba, 3bc, 3be, and 3bj are reported in the literature.9

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, belongs to iodides-buliding-blocks compound, is considered to be a conventional heterocyclic compound, which is widely used in drug synthesis. The chemical synthesis route is as follows. SDS of cas: 103440-52-4

General procedure: This kind of general experimental procedure is based on our already published procedure.13 The general procedure (GP) was carried out with ortho-iodoester 1a-d (105.0-136.0 mg, 0.40 mmol) and aldehyde 2a-k (195.0-313.0 mg, 1.6 mmol) in the presence of Pd(OAc)2 (5.0 mg, 5 mol%), Ag2O (111.3 mg, 0.48 mmol), and TBHP (257.1 mg, 2.0 mmol) allowing the reaction mixture to stir at 120 C for 12-20 h. Progress of the reaction was monitored by TLC until the ortho-iodoester 1a-d had completely reacted. Then the reaction mixture was removed from the oil bath and allowed to reach r.t. DCE (2 mL) and concd H2SO4 (1.0 mL) were added and the mixture was stirred at 60 C for 5 min to 2 h. Progress of the product formation was monitored by TLC until the reaction was complete. The mixture was quenched by the addition of aq NaHCO3 and then extracted with CH2Cl2 (3 * 15 mL). The combined organic layers were washed with brine, dried (Na2SO4), and filtered. Evaporation of the solvent under reduced pressure and purification of the crude material by silica gel column chromatography (PE/EtOAc) furnished the products 3 (57.0-86.0 mg, 55-69%). The products 3aa, 3ac, 3ai, 3aj, 3ak, 3ba, 3bc, 3be, and 3bj are reported in the literature.9

The synthetic route of 103440-52-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Suchand, Basuli; Satyanarayana, Gedu; Synthesis; vol. 51; 3; (2019); p. 769 – 779;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 103440-52-4, These common heterocyclic compound, 103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

Methyl 2-iodo-5-methylbenzoate (104.13 g; 358 mmol) is dissolved in THF (500 ml) under aninert nitrogen atmosphere followed by the addition of triethlamine (150 ml; 1.07 mol) and4,4,5,5-tetramethyl-1,3,2-dioxaborolane (68.8 g; 537 mmol). The mixture is additionallydegassed by bubbling nitrogen gas in for 5 mm. Then tri-(o-tolyl)-phosphine (5.45 g; 17.9 mmol) and palladium(ll)-acetate (2.01 g; 8.96 mmol) is added and the mixture is heated to 75C for 1 hour. The reaction mixture is cooled to 0C followed by careful addition of sat. aq. NH4CI solution (to the point where no further gas evolution occurs). The black suspension is filtered, the filtrate is concentrated under reduced pressure and water is added to theresidue. The product is extracted with EtOAc (2x 200 ml). The combined EtOAc layers are dried over MgSO4, filtered and the solvent is evaporated under reduced pressure. The residue is purified by CC with heptane I EtOAc = 95 I 5, to give 82.7 of the title compound as a slightly orange solid; tR [mm] = 0.92; [M+H] = 277.22.

Statistics shows that Methyl 2-Iodo-5-methylbenzoate is playing an increasingly important role. we look forward to future research findings about 103440-52-4.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BOSS, Christoph; BRISBARE-ROCH, Catherine; BROTSCHI, Christine; GUDE, Markus; HEIDMANN, Bibia; JENCK, Francois; SIFFERLEN, Thierry; STEINER, Michel; WILLIAMS, Jodi; WO2015/83094; (2015); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 103440-52-4,Some common heterocyclic compound, 103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, molecular formula is C9H9IO2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: An oven-dried Schlenk tube equipped with a Teflon valve was charged with a magnetic stir bar, CuI (10 mg, 0.05 mmol, 10 mol%), K2CO3 (276 mg, 2.0 mmol), 1,10-phenanthroline (20 mg, 0.10 mmol, 20 mol%) and cyclic thiourea (0.5 mmol), 4 ? Molecular Sieves. The tube was evacuated and backfilled with N2 (this procedure was repeated 3 times). Under a counter flow of N2, methyl-2-iodobenzoate 1 (0.6 mmol) and DMF (2.0 mL) were added by syringe. The mixture was stirred at 100 oC for 24h. After the reaction was completed, the mixture was directly passed through celite and rinsed with 30 mL of EtOAc. The combined filtrate was concentrated and purified by column chromatography on silica gel to give the pure product.Yellow Yellow solid; mp 105-107 C; 1H NMR (400 MHz, CDCl3) delta 8.09 (s, 1H), 7.35 (d, J = 8.0 Hz, 1H), 7.12 (d, J = 8.0 Hz, 1H), 3.73 (s, 2H), 3.30(s, 2H), 2.40 (s, 3H), 1.07 (s, 6H); 13C NMR (100 MHz, CDCl3) delta 161.6, 136.5, 134.6, 131.2, 129.7, 124.1, 122.0, 57.0, 52.5, 27.9, 24.2, 20.8 ppm. Anal. Calcd. for C14H16N2OS: C 64.58, H 6.19, N 10.76; found: C 64.25, H 6.27, N 10.49; EI-MS: m/z = 260 (M+)

The synthetic route of 103440-52-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Chen, Dingben; Wu, Jiashou; Yang, Jianguo; Huang, Ling; Xiang, Yubo; Bao, Weiliang; Tetrahedron Letters; vol. 53; 52; (2012); p. 7104 – 7107;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

These common heterocyclic compound, 103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Product Details of 103440-52-4

General procedure: A dry, N2 flushed 25 mL round-bottomed flask, equipped with a magnetic stirring bar, was charged with aryl iodide 3 (1 mmol) in anhydrous THF (5 mL), and cooled to -40 C. i-PrMgCl (2 M in THF, 2 mmol) was slowly added. After 0.5 h, CuCN¡¤2LiCl (premixed CuCN and 1 M LiCl in THF) (0.1 mmol) was added. After 5 min, at the same temperature, 2-chloro-3-iodo-propene (2 mmol) was added and the reaction mixture allowed to warm to rt. The reaction mixture was quenched with sat. NH4Cl (20 mL) and extracted with MTBE (2 ¡Á 20 mL). The combined organic fractions were washed with brine (10 mL), then dried over Na2SO4, and concentrated in vacuo. The crude product was used in the next step after a silica plug treatment or without further purification.

The synthetic route of Methyl 2-Iodo-5-methylbenzoate has been constantly updated, and we look forward to future research findings.

Reference:
Article; Linghu, Xin; McLaughlin, Mark; Chen, Cheng-Yi; Reamer, Robert A.; Dimichele, Lisa; Davies, Ian W.; Tetrahedron Letters; vol. 53; 13; (2012); p. 1550 – 1552;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Electric Literature of 103440-52-4, A common heterocyclic compound, 103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, molecular formula is C9H9IO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

General procedure: To a solution of methyl 2-iodobenzoate (5a) (262 mg, 1.00 mmol) and benzophenone (2a)(275 mg, 1.51 mmol, 1.51 equiv) dissolved in THF (5.0 mL) was slowly added(trimethylsilyl)methylmagnesium chloride (0.983 M, THF solution, 3.05 mL, 3.00 mmol,3.00 equiv) at room temperature. After stirring for 12 h at the same temperature, to themixture was added an aqueous saturated solution of ammonium chloride (10 mL). Themixture was extracted with EtOAc (10 mL ¡Á 3), and the combined organic extract waswashed with brine (5 mL), dried (Na2SO4), and after filtration, the filtrate was concentratedunder reduced pressure. The residue was purified by flash column chromatography (silica-gel16 g, n-hexane/EtOAc = 10/1) to give 3,3-diphenyl-3H-isobenzofuran-1-one (6a) (250 mg,0.873 mmol, 87.3%) as a colorless solid.

The synthetic route of 103440-52-4 has been constantly updated, and we look forward to future research findings.

Reference:
Article; Nakamura, Yu; Yoshida, Suguru; Hosoya, Takamitsu; Chemistry Letters; vol. 46; 6; (2017); p. 858 – 861;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 103440-52-4, name is Methyl 2-Iodo-5-methylbenzoate, A new synthetic method of this compound is introduced below., 103440-52-4

In a dry Schlenk Tube at RT under nitrogen are successively charged 2-iodo-5- methylbenzoic acid methyl ester (13.765 mmol, 1 eq), Cul (2.753 mmol, 0.2 eq), CsF (27.529 mmol, 2 eq), 2-tributylstannylpyridine (20.647 mmol, 1.5 eq), Pd(PPh3)4 (1.376 mmol, 0.1 eq) and DMF (60 mL). The resulting suspension is stirred at 90C overnight. The obtained reaction mixture is diluted with EtOAc and filtered through a short pad of Celite. A solution of sat. aq. NaHC03 is then added to the filtrate and the aq. phase extracted with EtOAc (3 times). The combined organic layers are washed with H20 and brine, dried over Na2S04, filtered and concentrated under reduced pressure. Purification is achieved by FC (EtOAc/Heptane 1 :4 to 3:7) to give methyl 5-methyl-2-(pyridin-2-yl)benzoate (2.64 g) as a brown oil. LC-MS (conditions A): tR = 0.67 min, [M + 1 ]+ = 228.07.

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; ACTELION PHARMACEUTICALS LTD; BOSS, Christoph; BROTSCHI, Christine; GUDE, Markus; HEIDMANN, Bibia; SIFFERLEN, Thierry; WILLIAMS, Jodi, T.; WO2013/182972; (2013); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com