Month: July 2021

Application of 328-73-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 328-73-4, name is 1-Iodo-3,5-bis(trifluoromethyl)benzene belongs to iodides-buliding-blocks compound, it is a common compound, a new synthetic route is introduced below.

General procedure: In an open round-bottomed flask containing deionised water (20?25 mL), azido-alkyne (1, 1.0 equiv), aryl iodide (2, 2.0 equiv), cuprous oxide nanomaterials (15 mol percent), and Cs2CO3 (2.0 equiv) were added and stirred vigorously under sonication for 1?1.5 h at 80 °C, making sure that no halides escaped during the reaction. After that ethyl acetate was added in it and the mixture was centrifuged to separate the nanocatalyst. Aqueous phase was then again extracted with ethyl acetate repeatedly. Column chromatography afforded pure product (3a?k). The nanoparticles were washed with ethanol water(3) and dried under vacuum before reuse.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles, 1-Iodo-3,5-bis(trifluoromethyl)benzene, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Chatterjee, Nivedita; Pal, Rammyani; Sarkar, Swarbhanu; Sen, Asish Kumar; Tetrahedron Letters; vol. 56; 25; (2015); p. 3886 – 3889;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 450412-28-9,Some common heterocyclic compound, 450412-28-9, name is 1-Bromo-3-chloro-2-iodobenzene, molecular formula is C6H3BrClI, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A round bottom flask was charged with 13.45 g of phenylboronic acid, 110.29 mmol) was added dropwise a solution of 1-bromo-3-chloro-2-iodobenzene (35 g, 110.29 mmol), Pd (PPh3) 4 (1.27 g, 1.10 mmol), NaOH (4.41 g, 110.29 mmol), THF (485 mL) and water (243 mL). Then, the mixture is heated under reflux at 80 C . When the reaction is complete, dilute with distilled water at room temperature and extract with methylene chloride and water. The organic layer was dried over MgSO4 and concentrated. The resulting compound was purified by silicagel column and recrystallized to obtain 18.59 g of the product. (Yield: 63%)

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 1-Bromo-3-chloro-2-iodobenzene, its application will become more common.

Reference:
Patent; DUK SAN NEOLUX CO., LTD.; KIM, Hyo Jin; PARK, Nam Jin; KIM, Seul Gi; HWANG, Sun Pil; (46 pag.)KR2017/95602; (2017); A;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Some common heterocyclic compound, 628-21-7, name is 1,4-Diiodobutane, molecular formula is C4H8I2, traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route. Computed Properties of C4H8I2

General procedure: Under N2 atmosphere, LHMDS (1 M in THF, 3.0 equiv) was added to a cooled solution (0 C) of tricyclic lactam (1.0 equiv) dissolved in THF (6 mL). After stirring for 1 h at 0 C, an excess of alkyl halide (3.0 equiv for methyl iodide and 5.0 equiv for ethyl iodide) was added. For the introduction of five and six membered spirocyclic rings 1,4-diiodobutane or 1,5-diiodopentane (1.0 equiv) was added at 0 C. The solution was stirred for a further 3 h at 0 C. Completion of the conversion was confirmed by TLC. Saturated NaCl solution (10 mL) was then added and the mixture was extracted with EtOAc (3 × 10 mL). The organic layer was washed with NaCl solution (10 mL) and water (10 mL) and the aqueous layer was reextracted with EtOAc (2 × 10 mL). The combined organic layers were dried (Na2SO4), filtered, and the solvent was evaporated in vacuo and the residue was purified by FC.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route 628-21-7, its application will become more common.

Reference:
Article; Sarkar, Soumya; Schepmann, Dirk; Wuensch, Bernhard; Tetrahedron Asymmetry; vol. 22; 13; (2011); p. 1411 – 1422;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Related Products of 116632-39-4, These common heterocyclic compound, 116632-39-4, name is 5-Bromo-2-iodotoluene, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

(1) 4-Bromo-4′-fluoro-2-methylbiphenyl 4-Bromo-1-iodo-2-methylbenzene (10.5 g, 35.4 mmol) was dissolved in 1,2-dimethoxyethane (100 mL), and (4-fluorophenyl)boronic acid (7.4 g, 52.9 mmol), [1,1′-bis(diphenylphosphino)ferrocene]palladium dichloride-dichloromethane adduct (1.5 g, 1.84 mmol) and potassium phosphate hydrate (18.8 g, 88.6 mmol) were added, followed by stirring at room temperature for 16 hours under a nitrogen atmosphere. After the insoluble materials in the reaction solution were filtered off, the filtrate was concentrated under reduced pressure. The resulting residue was purified by silica gel column chromatography (Moritex Corporation, elution solvent:hexane), and a fraction corresponding to the Rf value=0.60 (hexane) by thin layer chromatography was concentrated under reduced pressure to afford the title compound (5.1 g, 19.2 mmol) as a colorless oil (yield 54%). 1H-NMR (500 MHz, CDCl3) delta: 7.42 (1H, s), 7.36 (1H, d, J=8 Hz), 7.27-7.21 (2H, m), 7.13-7.04 (3H, m), 2.22 (3H, s).

The synthetic route of 116632-39-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; DAIICHI SANKYO COMPANY, LIMITED; US2011/112103; (2011); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 1643-29-4, name is 3-(4-Iodophenyl)propanoic acid, A new synthetic method of this compound is introduced below., HPLC of Formula: C9H9IO2

General procedure: HOBT (1.2 equiv.) was added to an ice-cooled solution of EDCI (1.2 equiv.) in anhydrous DMF (10 mL) under N2. The resulting solution was allowed to stir for 10 min. at 0 C, followed by the addition of the appropriate acid 7a-7l (1.2 equiv.) and DIPEA (2.5 equiv.). The resulting solution was stirred for another 15 min at 0 C, after which a solution of amine 6 (1.0 equiv.) in anhydrous DMF (5 mL) was added. The resulting reaction mixture was allowed to stir first at 0 C for 30 mins, then at rt for 5 h. The reaction mixture was then evaporated to dryness under vacuum. Saturated NaHCO3 solution (10 mL) was then added to the resulting crude followed by extraction of the aqueous layer using dichloromethane (3 x 15 mL). The combined organic layer was dried over Na2SO4 and evaporated to dryness under vacuum to afford the corresponding amides which were purified using flash column chromatography (30 – 50 % ethyl acetate -petroleum ether).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Article; Kapadia, Nirav; Ahmed, Shahrear; Harding, Wayne W.; Bioorganic and Medicinal Chemistry Letters; vol. 26; 14; (2016); p. 3216 – 3219;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Synthetic Route of 628-77-3, These common heterocyclic compound, 628-77-3, name is 1,5-Diiodopentane, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc, below Introduce a new synthetic route.

A solution of oxindole (25 g, 0.19 mol) in anhydrous tetrahydrofuran (800 cm3) was cooled to -20 C. then n-butyllithium (2.5M in hexanes, 152 cm3, 0.38 mol) was added slowly followed by N,N,N’,N’-tetramethylethylenediamine (51 cm3, 0.38 mol,).. After 15 min. 1,5-dilodopentane (174 g, 0.54 mol) was added slowly and the mixture was allowed to warm to room temperature.. After stirring for 16 h. saturated aqueous ammonium chloride solution (1L) and EtOAc (1L) were added.. After 15 min., the layers were separated and the aqueous phase was extracted with EtOAc (*2).. The combined organic layers were extracted with hydrochloric acid (1N), then washed with brine (500 cm3), dried (MgSO4), and concentrated to obtain an oil.. The oil was triturated with hexane (200 cm3) and benzene (20 cm3).. The precipitate was collected and dried in vacuo to obtain the subtitled compound (26.3 g, 69.6%) as colorless crystals: mp 110-114 C.; 1H NMR (DMSO-d6) delta 1.67 (m, 10H), 6.84 (d, 1H, J=8 Hz) 6.94 (t, 1H, J=8 Hz), 7.17 (t, 1H, J=8 Hz), 7.44 (d, 1H, J=8 Hz), 10.3 (S, 1H).

Statistics shows that 1,5-Diiodopentane is playing an increasingly important role. we look forward to future research findings about 628-77-3.

Reference:
Patent; American Home Products Corporation; Ligand Pharmaceuticals, Inc.; US6355648; (2002); B1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 55406-53-6, name is 3-Iodoprop-2-yn-1-yl butylcarbamate, A new synthetic method of this compound is introduced below., Computed Properties of C8H12INO2

EXAMPLESA solution is prepared in Dowanol TPM (tripropylene glycol methyl ether), containing 10% by weight of iodopropargyl butylcarbamate, 5% by weight of Octasoligen-Cobalt 8 (Borchers, Langenfeld, Germany) and 5% by weight of the stabilizer specified in Table 1. The compositions are stored at 40 C. The amount of IPBC was determined by means of HPLC at the beginning and after two weeks.

The synthetic route of 55406-53-6 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; Uhr, Hermann; US2009/36555; (2009); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps, and cheap raw materials. 147808-02-4, name is 2-Fluoro-1,4-diiodobenzene, A new synthetic method of this compound is introduced below., Computed Properties of C6H3FI2

Step 1-A: A solution of 2-fluoro-1,4-diiodo-benzene (804 mg, 2.31 mmol) in tetrahydrofuran (8 mL) was cooled to -78 C. (external) and a 2.0 M solution of isopropylmagnesium chloride in tetrahydrofuran (1.44 mL, 2.89 mmol) added via syringe. The resulting mixture was stirred for 30 minutes while allowing the temperature of the cooling bath to rise to -50 C. The reaction mixture was then immersed in an ice/water bath and anhydrous N,N-dimethylformamide (425 muL, 5.78 mmol) was added by syringe to the reaction mixture. The reaction was stirred at 0 C. for 10 minutes, then at room temperature for 5 minutes. Thin layer chromatography (TLC) indicated the reaction to be complete. The mixture was diluted with saturated aqueous ammonium chloride solution (8 mL) and extracted with diethylether (2*20 mL). The combined organic layers were dried over sodium sulfate and concentrated in vacuo. The resulting residue was purified by chromatography over silica gel gradient eluted with 0 to 15% v/v ethyl acetate/hexanes to give 2-fluoro-4-iodo-benzaldehyde as a fluffy-white solid (389 mg, 67%).

The basis of chemical reaction formula synthesis, the synthesis route is composed of some specific reactions and combined according to certain logical thinking. We look forward to the emergence of more reaction modes in the future.

Reference:
Patent; Chen, Shaoqing; Huby, Nicholas J.S.; Kong, Norman; Moliterni, Jonh Anthony; Morales, Omar Jose; US2009/170920; (2009); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

Adding a certain compound to certain chemical reactions, such as: 28547-29-7, name is 2-Bromo-4-iodobenzoic acid, belongs to iodides-buliding-blocks compound, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 28547-29-7, Product Details of 28547-29-7

To a stirred solution of 4-iodo-2-bromobenzoic acid (5 g, 15.29 mmol) in ethyl alcohol (EtOH; 100 mL) was added sulfuric acid (H2SO4; 5 mL), and the reaction mixture was heated at 80 C. for 18 h. The reaction mixture was cooled to 25 C. and concentrated under reduced pressure. The residue was diluted with EtOAc (2*100 mL) and washed with H2O (100 mL). The combined EtOAc extracts were washed with brine, dried over Na2SO4 and concentrated under reduced pressure to afford the compound as a pale yellow solid (5 g, 92%): 1H NMR (400 MHz, DMSO-d6) delta 8.04 (d, J=1.2 Hz, 1H), 7.71 (d, J=7.6 Hz, 1H), 7.51 (d, J=8.4 Hz, 1H), 4.41 (q, J=7.2 Hz, 2H), 1.41 (t, J=7.2 Hz, 3H).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it.

Reference:
Patent; Dow AgroSciences LLC; Lo, William C.; Hunter, James E.; Watson, Gerald B.; Patny, Akshay; Iyer, Pravin S.; Boruwa, Joshodeep; US2014/171312; (2014); A1;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com

In the chemical reaction process, reaction time, type of solvent, can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product. An updated downstream synthesis route of 25309-64-2 as follows. category: iodides-buliding-blocks

General procedure: to a stirred solution of iodo benzene (1.0 mmol) and trans-4-hydroxy-L-proline (2.0 equiv) in dry DMSO (3.0 mL) at rt was added CuI (20 mol %) followed by Cs2CO3 (2.5 equiv) and heated at 110 C for 24 h. The progress of the reaction was monitored by TLC. After the reaction was complete, the reaction mixture was allowed to cool, and a 1:1 mixture of ethyl acetate/water (20 mL) was added. The combined organic extracts were dried with anhydrous Na2SO4. The solvent and volatiles were completely removed under vacuum to give the crude product, which was purified by column chromatography on silica gel (petroleum ether/ethyl acetate, 9:1) to afford the corresponding coupling product.

According to the analysis of related databases, 25309-64-2, the application of this compound in the production field has become more and more popular.

Reference:
Article; Reddy, V. Prakash; Kumar, A. Vijay; Rao, K. Rama; Tetrahedron Letters; vol. 52; 7; (2011); p. 777 – 780;,
Iodide – Wikipedia,
Iodide – an overview | ScienceDirect Topics – ScienceDirect.com